I was wondering about doing brakes. When sliding the new pads in is it ok if they are tight against the rotor or do they have to have a space and be kind of springy. I placed mine in and they are tight against the rotor so I stopped in case this was incorrect. Any help will be greatly...
As I begin to inch closer to a supercharger install on my Heavyweight Crew Cab 4x4 I understand the need may arise for some better rotors, calipers and pads. I'm curious to know what is being used across the forum to get an idea of where to begin the search.
Haven't been on here much, but I have s 2013 Ram 1500 that I have bagged and narrowed the rear axle. My problem is the rear brakes are hitting the frame rail and I need to rotate the caliper down or under the disk so it doesn't hit the frame. Does anyone have any experience with this or know...
I'm sure I'll get a quick answer to this. I was at the dealership test driving a 2020 1500 Limited. Love the vehicle but I was backing up and there was nothing behind me that I could see and all of a sudden it felt like the brake was applied with force. I assumed it was a safety feature but I...
I just bought a 1991 Dodge B250 van. Generally in good shape, but some of the brake lines are badly rusted so I wanted to replace them. I also wanted to replace the two valve assemblies behind the drivers' side wheel on the chassis. I've spent all day trying to locate the part numbers only to...
I own a 2017 1500 big horn with 14000 miles that has very soft brakes. At 10K miles the truck wouldn’t come to an immediate stop at full brake force. Brake booster was replaced under warranty. A week later I developed the same issue and brought back to the dealer, master cylinder was replaced...
So I’m having trouble with my ram. I recently changed the brake pads. Before this the brakes were making a grinding sound. My reason for changing the pads. When I was changing them,I noticed that the old pads still had a lot of thread left. I still put in the new ones. Took it out for a drive...
Hey Guys/Gals,
I’ve been having an issue with my aftermarket brake control for some time now. When I plug my trailer into the seven pin connector the brake control lights up as expected. When I press the brake peddle the brake control isn’t recognizing it so the trailer brakes don’t engage. If I...
Good afternoon. I'm a newbie and this is my first post.
Almost 1 year ago I purchased a "certified pre-owned" 2017 Ram Bighorn with just under 12k miles. Over the past few months I've noticed that upon stopping the brakes are pulsating. I notice it more during lower speed stops but I think...
Help! My brake light and EPS lights both came on after I had my rear brakes changed. I just thought maybe a sense was knocked loose but now it seems like my brakes arent working.
Hello all,
Found out today the ABS pump on my 2001 2wd Laramie is out. Can just the motor to the pump be changed and if so what are some of the possible donor cars? So far I know a 2000 is the only one that will work. If it matters I have a 5.9 Z engine. If this is not a solution then what...
2007 Ram 1500, quad cab, 270,000 miles:
I just changed rotors, pads, and calipers all around. I have bleed the brakes 6 or 7 times starting at the passenger rear and working toward the master cylinder. I have bleed the brakes with the key on, in the ignition, out of the ignition, and with the...
So I've own a few 4th Gen truck varying in mileage and years.
I've had 2 2009 Rams. A 2013 and 2 2014's.
This is my 2nd 2014. It has about 42k miles on it and I am having a very strange issue with my brakes that none of my other Ram's had.
When I lightly press the brake pedal it will go to...
I have a 2001 ram 1500 4x4 with the 318 (5.2). Recently my brakes have started to grab super tight at speeds under 10 mph. They will screech the tires and stop instantly. They don't lock, just grab super tight. At all other speeds they work perfect. I can manage it with a light foot in dry...
2011 3500 6.7
I’m not super savvy on this truck, it’s got way to many electrical components and it’s my husbands work truck, not mine.
A few weeks ago left rear caliper seized. Replaced left caliper, rotor and both rear brake pads. Immediately the pedal was super spongy, no brakes until...
Okay so my 2003 Dodge Ram2500 stalls when I brake but not every time only when I brake hard or fast. Also my check engine light has been on but there’s a massive hole in my muffler so I figured it was my O2 sensors. Pulse my brake light just came on and is flashing at me. My brake fluid isn’t...
So I have a 2014 Ram 1500 Limited crew cab with 6'4" bed and after lift, tires, wheels, front and rear heavy steel bumpers, winch and lights there is obviously a lot of weight added. I want to upgrade the brakes but the only real option I can dig up is the Baer 15" front set below (please let me...
New guy here... Hoping to get some feedback.... my 2004 3500 Dodge Diesel just hit 100K .... I do towing and I installed a deep trans pan. I change the oil and tranny fluid as needed, also brakes. I replaced 2 leaking pinion seals, what else typically needs attention at 100K ? and what's the...
i have a 2001 ram 1500 4x4
My right rear wheel locks only on hard braking
Now I bought this used and someone has replaced all steel brake lines on the truck
From what I can tell it looks like they have the right front brake line hooked up to the rear abs and the rear hooked up to the right...
I have a 2012 Ram 1500. Check engine light came on and apparently my brake pedal position sensor is not working. Haven't been doing any burnouts, so I just assume the sensor is dead(?). After a few Google searches, is replacing it as easy as ordering the sensor and popping it back in like the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.