Demon-HeMi
Senior Member
- Joined
- Dec 30, 2010
- Posts
- 4,346
- Reaction score
- 3,300
- Location
- Houston
- Ram Year
- 2003, 2003, 2008, & 2013
- Engine
- (2) 5.7 HEMI, 3.7, & 3.6
looking good man!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Not every day you can snap a pic from 10 feet under the ground. Lol (new basement dug out)There's that bad ass runner [emoji41]
Sent from my SAMSUNG-SM-G935A using Tapatalk
Wrap or plasti dip unless we're talking actually divotsmy biggest regret is 2 inch spacers vs 1.5 or 1.75 it looks badass, but man its a gravel slinger. I'm re-gaining all the gravel dings i paid money to have worked out when i painted it.
so no better?lolEh I have 1-3/4 spacers. I’ll show you my fenders from the mud hole of a parking lot at work
Back on the road. Bad wheel bearing was the cause of my "almost died" thread. Took a basic alignment/exhaust shop one day to find what a chrysler dealership couldn't find in 3. Love paying for stuff twice.
Truck has 100k miles...so I'm gonna say the spacers, wheels, and tires, probably had little to do with it. Pretty positive that's the oe wheel bearing on that side. I think stabbing the brakes to not hit that dog was the inducing factor. Lolthink the bearing is caused by the spacers on the wheels, or think it was bad before you put them on and finally showed its ugly face