quake9999
Junior Member
About a year ago i bought P/n 82214240AC to add the reverse camera to my 2014 Bighorn. I never got around to installing it until a couple days ago and i got to the point in the instructions where you assemble the connector under the dash and plug in the "radio harness" that goes up to the radio. Come to find out the "radio harness" is not in the box which i did open but i never took anything out that i can remember.
Of course its now my wife's daily so now this has become a priority.
Anyway its been too long to return it to where i got it from but i need that radio harness.
There is no part number in the instructions for it and 2 different dealers parts counter guys told me unless i had a part number they were clueless.
So does anybody happen to know if there is a Mopar part number for the harness that is missing?
Or maybe just the connectors/Pins that i would need to buy to make my own?
I mean i know where the wires all go from the instructions so making a replacement would not be that big of a deal for me. I just have know idea where to even start looking to find the pins or connector that i would need to make this happen.
Honestly at the minimum if i could get the pins for the connector on the rear of the radio i could just solder the wires on the other end where they have you assemble the connector that the radio harness would plug in to.
I would really to not have to buy another $350 kit to get the missing 3' harness.
Link to kit instructions ↓
Of course its now my wife's daily so now this has become a priority.
Anyway its been too long to return it to where i got it from but i need that radio harness.
There is no part number in the instructions for it and 2 different dealers parts counter guys told me unless i had a part number they were clueless.
So does anybody happen to know if there is a Mopar part number for the harness that is missing?
Or maybe just the connectors/Pins that i would need to buy to make my own?
I mean i know where the wires all go from the instructions so making a replacement would not be that big of a deal for me. I just have know idea where to even start looking to find the pins or connector that i would need to make this happen.
Honestly at the minimum if i could get the pins for the connector on the rear of the radio i could just solder the wires on the other end where they have you assemble the connector that the radio harness would plug in to.
I would really to not have to buy another $350 kit to get the missing 3' harness.
Link to kit instructions ↓