Darin Sharp
Junior Member
I just bought a 2015 ram with a vp1/ra1 radio. I would like to up grade to allow BT. Has anyone installed the newer 2017 version with BT into the older trucks? If so what all was involved?
Thanks
Thanks
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I just bought a 2015 ram with a vp1/ra1 radio. I would like to up grade to allow BT. Has anyone installed the newer 2017 version with BT into the older trucks? If so what all was involved?
Thanks
If I want to replace the OEM Uconnect 3 with an aftermarket stereo would I lose my rear backup cam and the functionality of the USB ports?
Looking for my options have a 2012 bighorn with just a basic radio cd sirrus uconnect radio looking to upgrade to a factory nav system but not sure what radio to get and what else i need any info or directions
Unfortunately my 2014 Ram 1500 doesn't have the proper radio to work with UConnect remote services. Does anyone know if I can upgrade my radio from the 5.0 to the 8.4 so I can use these services???
I know nothing about the new audio systems and I have just bought a used 2017 Tradesman Ram 1500 with the base radio, a RA1 I believe. I would like to up grade to a better factory radio that I can use the cell phone hands free and stream music from it. Will the RA2 radio do what I want? Do I need anything else with it or just the radio? Will it work by just plugging it in or do I have to go to the dealer to have a computer reprogramed like everything else? Sorry about the stupid questions but that's what happens when you get old and technology passes you by.
Thanks, I looked at a Kenwood but thought it might be easy to install factory radio. I guess it would be easier and cheaper in the long run to go after market. I already changed the mirror for a dual backup camera system so I don't want to mess with that.
I just installed hertz audio 3.5’s in my dash. But now they overpower my door speakers and are way too bright. What can I do to tone them down?
I just installed hertz audio 3.5’s in my dash. But now they overpower my door speakers and are way too bright. What can I do to tone them down?