Blinker

[Truckgang]

My left side headlight was stripped out, all that was left was the pigtail that goes to the high beam (I have dual and not quad headlights, it’s a 2012) and the wires for the lowbeam. So I purchased the pigtail for the lowbeam, and the socket that goes into the bulb. I crimped the new wires back onto the old wires, and currency tested it. It says a current is running through each wire, and the bulb lights up. However the blinker won’t blink. If anyone knows why this may be any help is much appreciated, and if I wasn’t clear enough I’d be happy to specify anythying

 

[1500ram12]

The wiring is the same whether you have dual or quads from 09-18. Only difference is on the quad headlights the wiring splits inside the housing so it has separate low and high beam bulbs. I believe on the 09-12 the connector for the low/high beams is green and the turn/park connector is black or dark Grey. Verify that you have everything wired correctly

2018 Ram 2500 6.4L Hemi Tradesman