Can bus connector

[Brandam1]

Has anyone ever piggy backed on the can bus network pins under the dash to add a option? I cant find anywhere that has the pins for it. Any help would be great. Also I am trying to add the park assist sensors for 2014 ram express if that matters

 

[Roman217]

There are CAN C and CAN IHS hubs near the steering wheel shaft under the gauge cluster. You can plug into them with TE Connectivity connectors; part number 5-2138650-1 for the connector and 5-963715-6 for the pins.

 

[Brandam1]

There are CAN C and CAN IHS hubs near the steering wheel shaft under the gauge cluster. You can plug into them with TE Connectivity connectors; part number 5-2138650-1 for the connector and 5-963715-6 for the pins.

Awsome thanks for that. This is the last piece I need to get it done.

 

[Roman217]

Ahh, I may be off, looks like the parking sensor module connects to CAN C not CAN IHS.

EDIT: The CAN C connector is 2-2138650-1. It uses the same pins as the CAN IHS. Both could be made to work, they are keyed just a little dffierently.

 

[BlownGP]

Ahh, I may be off, looks like the parking sensor module connects to CAN C not CAN IHS.

EDIT: The CAN C connector is 2-2138650-1. It uses the same pins as the CAN IHS. Both could be made to work, they are keyed just a little dffierently.

Do you know what connectors I need for a 2018 Ram CAN IHS.
It is different than 2017 and below.

They look like this. The part number is 68498833AA and it's like $40 for one connector but it's delayed everywhere


Do you know if Mouser has anything like this?

Thanks
Steven