OFw Kalli
Member
- Joined
- Jul 3, 2017
- Posts
- 69
- Reaction score
- 32
- Ram Year
- 2017
- Engine
- 5.7 Hemi
Hi all
I found a few month ago a OBD II headup display in sale and I thought it's a nice feature.
Amazon etc offer the same or similar ones.
Hint:
Make sure that you get one with a flat and not a round cable. A flat cable is easier to press in at the side of the dashboard.
I thought it's a big deal to install the headup, but it isn't. It's very easy and done in around 30 minutes or less.
* Plug in the OBD to USB adapter in your OBD port.
* Open the side of your dashboard with a flat screw driver. It's only fixed with snap in pins. Easy to pop out.
* Make sure that the cable don't block (best not touch) the park brake/park brake release. There is way enough space in this area under the dashboard, don't worry.
* press with a flat screw driver the cable in the gap wet ween the dashboard and side cover. Here is great to have a flat cable. Near the speaker is a screw or similar that prevent to press the cable deep in. But it's ok.
If needed or if you want pop out the cover of the speaker. But it's not needed. Hide cable always in this gap till you are in the area where you want to have the headup display projector.
Fixation and setup according the device manual.
I tried the reflection patch but this patch border me way more than the double reflection in the windscreen.
I found a few month ago a OBD II headup display in sale and I thought it's a nice feature.
Amazon etc offer the same or similar ones.
Hint:
Make sure that you get one with a flat and not a round cable. A flat cable is easier to press in at the side of the dashboard.
I thought it's a big deal to install the headup, but it isn't. It's very easy and done in around 30 minutes or less.
* Plug in the OBD to USB adapter in your OBD port.
* Open the side of your dashboard with a flat screw driver. It's only fixed with snap in pins. Easy to pop out.
* Make sure that the cable don't block (best not touch) the park brake/park brake release. There is way enough space in this area under the dashboard, don't worry.
* press with a flat screw driver the cable in the gap wet ween the dashboard and side cover. Here is great to have a flat cable. Near the speaker is a screw or similar that prevent to press the cable deep in. But it's ok.
If needed or if you want pop out the cover of the speaker. But it's not needed. Hide cable always in this gap till you are in the area where you want to have the headup display projector.
Fixation and setup according the device manual.
I tried the reflection patch but this patch border me way more than the double reflection in the windscreen.