DERJ
Senior Member
I have a 3/6 drop on my Ram right now. I am having problems with rubbing the top of the wheel well liner on the left front and rear. Anyone also have this problem? I have a 2" belltech coil up front with one coil cut off to make the 3" drop. I have the belltech 4" coil in the rear with two coils cut off to make a 6" rear drop, also have the cut kit installed. This is what IHC recommend to do to get the 3/5 drop. The ride is great but it rubs every day, gets old after a while. Any help would be great.
Also I seem to be 3/8 lower on the left side, seems to be coming from the left front. I give up..
Yes, I had a similar problem on my R/T with the 4/6 drop and the factory 285/45/22s - I ended up raising the front up 1/2” since my tires were only 6 months old... not sure if this unique to the R/T or what...
I also had the same issue with the left side being slightly lower so I adjusted by cutting 1/4 less coil off that side when I swapped springs and took the Inez front arms off.