leak from power steering gear.

[JURO]

my entire power steering system is now removed from vehicle,
& I found the source of the leak, bottom of gearbox, near pitman shaft.

guess a seal is bad?

https://www.ebay.com/itm/2248233924...fWkuoZ1hEjceG574BniNkn2Q3i7VSXfw|ampid:PL_CLK

 

[hrdman2luv]

my entire power steering system is now removed from vehicle,
& I found the source of the leak, bottom of gearbox, near pitman shaft.

guess a seal is bad?

https://www.ebay.com/itm/224823392449?hash=item345884b8c1&amdata=enc:AQAIAAABEIZVdH0obNKM6mUv4baImMnuyHYxjhxtoJoxG8uYU63QvwYPXAAEwnfyc%2BZuVzm%2BTPX7lfN9cuRj067Fw1wjezQ382DqMLXCX4NKHVBvGvJMEIv6cgGMNCpGVxpeWAGU9qJK1I2%2FtZokIf911Z%2FUoVtlvH2Tz96jTcvgE%2FWOqyR65Bq6Poa0Y1mjIbgcsiPXgZa4zUR6DbngaiKE8YZ%2BlliipOBlWsMQZC93KBJE3GFiU1hGkcg%2FYu3582phtYVCRo1SjZ5%2FTKbTI3TEjr4BLTafLFAsHd6sVQtvbcpffRqkOO%2FTbvLTjdWKDnxdrvF%2Fw6T%2Bl8OpEyTgfWkuoZ1hEjceG574BniNkn2Q3i7VSXfw|ampidL_CLK

Was this easy to change? Mine is leaking. I thought it was a hose. But as luck would have it..........

 

[JURO]

well i am finished with replacing the seals, but i had to buy a new bearing:

https://www.bdiexpress.com/us/en/Ca...Thrust-Roller-Bearings/SCH-SLH12501/p/1178136

pitman arm had to get pressed off, that was hard. now i have to figure out the best way to install it,
as i neglected to mark original position for reference.

now i need to hurry up & put my engine back together.