RamHemi5.7
Senior Member
- Joined
- Sep 11, 2013
- Posts
- 531
- Reaction score
- 114
- Location
- Gilroy Ca
- Ram Year
- 2013 Quad Cab
- Engine
- Hemi 5.7 8 Speed
so, whats the PN for the cargo lamps? those really look they put out some light.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
so, whats the PN for the cargo lamps? those really look they put out some light.
I still receive an error on my rear plate bulbs with resistors this is getting annoying
I still receive an error on my rear plate bulbs with resistors this is getting annoying
Buy the cheap ones off eBay.... I've been running them for months in every socket a T10 will fit with no issues.
Sent from my GT-P5210 using Tapatalk
Buy the cheap ones off eBay.... I've been running them for months in every socket a T10 will fit with no issues.
Sent from my GT-P5210 using Tapatalk
Link?
Interesting. Do you have the evic?
I do!
Sent from my GT-P5210 using Tapatalk
This has me at a stand still.. You should be getting a bulb out message. I wonder what's different about these cheaper bulbs you have that aren't throwing this message
IDK, never had an issue with them period. I have them in every hole in the interior, my license plate and reverse lights..... but the reverse lights are getting swapped out for brighter ones... they suck terribly! The factory bulb was brighter.
Sent from my GT-P5210 using Tapatalk
Well that's good to hear they are working everywhere else. Did you order the Cree reverse bulbs for the replacements?
No I didn't order Cree, just some 9 SMD bulbs.... but I think that the Cree bulbs are in the near future. These cheaps bulbs I'm using don't flash or flicker. They light when the truck is on and off. Like I said, I've had NO issues with them and for $7 for 10 bulbs, delivered in a few days, you can't go wrong.
Sent from my GT-P5210 using Tapatalk
I think I might have figured out why your reverse bulbs weren't as bright as they should be. You said the ones your using are t10? The reverse and cargo for the 4th gens are t15. Might be the issue right there