Mevotech install question!!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

R.L.K.

Senior Member
Supporting Member
Joined
Dec 1, 2013
Posts
12,803
Reaction score
12,500
Location
Bristol , Tn.
Ram Year
2014 4X4 QC Express 6 speed auto 355 differentials
Engine
5.7 Hemi
Thanks man! The ride, holy ****, it's sooooo much better than the spacers. If I'm ever in TN I'll buy ya a beer. You indirectly talked me into them with all your posts about how great they are etc. Ha ha


Sent from my iPhone using Tapatalk
No Beer like FREE beer !

Glad I could help !
 

L84DNR

Member
Joined
Oct 15, 2014
Posts
35
Reaction score
9
Location
Fort Bragg NC
Ram Year
2014
Engine
Hemi 5.7
What did you set your bils at?

Sent from my GT-N5110 using Tapatalk
 

R.L.K.

Senior Member
Supporting Member
Joined
Dec 1, 2013
Posts
12,803
Reaction score
12,500
Location
Bristol , Tn.
Ram Year
2014 4X4 QC Express 6 speed auto 355 differentials
Engine
5.7 Hemi
What did you set your bils at?

Sent from my GT-N5110 using Tapatalk
I set mine to + 2.8" the top ring .
I believe the next going down is 2.1" then 1.4" then .7"

Measure the rake you have @ top center of the fender bove the tire front and back and set accordingly. I had almost 3 full inches , most guys set em to +2.1"

Good luck !
 

L84DNR

Member
Joined
Oct 15, 2014
Posts
35
Reaction score
9
Location
Fort Bragg NC
Ram Year
2014
Engine
Hemi 5.7
Thanks, I think I am going to do the bils upfront at 2.1 with a set of the mevos and a 1" spacer in the rear and probably run a set of 295 60 20 on stock 20s

Sent from my X-Fighter
 

R.L.K.

Senior Member
Supporting Member
Joined
Dec 1, 2013
Posts
12,803
Reaction score
12,500
Location
Bristol , Tn.
Ram Year
2014 4X4 QC Express 6 speed auto 355 differentials
Engine
5.7 Hemi
Sounds great ! You should end up with about 1" less rake than you have now .
I was gonna put a 1" spacer in the back , but I'll likely just wait till I install a 6" BDS lift .

How tall are 295 tires ?
 

L84DNR

Member
Joined
Oct 15, 2014
Posts
35
Reaction score
9
Location
Fort Bragg NC
Ram Year
2014
Engine
Hemi 5.7
Sounds great ! You should end up with about 1" less rake than you have now .
I was gonna put a 1" spacer in the back , but I'll likely just wait till I install a 6" BDS lift .

How tall are 295 tires ?


The 295s are about a 35 11.50


Sent from my iPhone using Tapatalk
 

sbuko213

Senior Member
Joined
Jun 30, 2014
Posts
591
Reaction score
122
Location
Hendertucky, NV
Ram Year
2019
Engine
6.7 HO
I set mine to + 2.8" the top ring .
I believe the next going down is 2.1" then 1.4" then .7"

Measure the rake you have @ top center of the fender bove the tire front and back and set accordingly. I had almost 3 full inches , most guys set em to +2.1"

Good luck !

I just cranked mine to 2.8 so I could fit 35's. It worked well.
 

R.L.K.

Senior Member
Supporting Member
Joined
Dec 1, 2013
Posts
12,803
Reaction score
12,500
Location
Bristol , Tn.
Ram Year
2014 4X4 QC Express 6 speed auto 355 differentials
Engine
5.7 Hemi
Looks Great !
 
Top