ChrisG1stHemi
Junior Member
- Joined
- Sep 29, 2014
- Posts
- 8
- Reaction score
- 0
- Ram Year
- 2003
- Engine
- 5.7 L Hemi
I have a 2003 ram 1500 with 5.7 L, I bought truck and had to rebuild engine. Truck sat for several months. After installing engine had a no start condition with no faults, put new crank sensor in and truck started but has delayed start and was coding P0335, drove for a few days then started coding for P0315, went to leave work on thurs and had no throttle response and the ETC light was on solid in the display, have codes P2166, P2167, P2116 and P2117...when I was troubleshooting the P0335 I noticed that I had 4.99 volts coming from PCM on the cam sensor signal wire. I'm pretty sure this is internal in PCM and now with the new codes being related to the PCM not remembering or learning the crank signal and the APPS position I am leaning towards replacing PCM. Anybody have any insite? Thanks