Next Mod Ordered!

[03MopaRamman]

Still no response tommorow will be two weeks, but gotta feeling when Ken gets his Cam mine won't be to far away as it was ordered up by Stu likely around the same time last week!

 

[KGBIGCOUNTRY]

Its odd he can post up those kinda deals and deliver about 50% of the time.

 

[KGBIGCOUNTRY]

Danny I was on the phone with Stu at 10am eastern standard time on the 4th when I placed my order with Stu and he said Crower takes bout a week and a half to grind em and ship. Im thinking mine should be at my work around the 18th poss, I cant remember where Crower is but I think my last one just shipped direct from there to me.

 

[03MopaRamman]

Well all I can say is I know Inertia is doin there Part and I'm hopin it gets shipped out from there and not back to Moes! We'll see, fingers crossed I hear somtin by Fri.
My Cam Bolt came in today and my special Miller Tool should be here tommorrrow as it cleared customs 2 days ago!

 

[03MopaRamman]

Ken, Was the 3rd when Stu asked Bob to confirm LSA and on the 6th when I talked to Stu he said it was already ordered up so when you get yours I should have my paypal for shipping or response from Bob as I said before he only actions things that are needed now.

 

[KGBIGCOUNTRY]

Which miller tool you order? I have all my parts now just waitin for the cam itself. Stu shipped me a whole new timing set which was a suprise but if he recomended it must be a good idea lol.

 

[03MopaRamman]

The "MST8513A Miller Tools 8513A Crankshaft Insert tool" which is the one for damper removal as last time I used a socket and near the end it started to stick and Fuckkd the Damper, which was tired lookin anyhow, so this time it should help eliminate any concern. Last time I bought the long threaded tool with the bearing for installing the damper, it was the Cats ASS.

 

[03MopaRamman]

Yeh you can't just get the tensioner alone. Could only just change it with the plate. That raises a good question wrt timing chain. I am thinking to get it off and change the bottum sprocket the oil pumps gotta come off right? So what are we talkin 4 bolts. Was curious as i haven't read up on it yet just looked at some pics I had on file.

 

[KGBIGCOUNTRY]

Nice nice

 

[KGBIGCOUNTRY]

I think its only a few bolts that hold that on, I had thought about ordering the 6.1 oil pump for mine from Stu its only $50 but forgot to lol.

 

[03MopaRamman]

Thanks, Will it fit the same, great Idea! I'll price it today!

P.S. Still Zero Response from Moes.

 

[Off_Road_Teacher]

P.S. Still Zero Response from Moes.

Seriously? What is their issue?

 

[0212353]

Post something on DT dude, Shelby isn't over here - get some attention over there.

 

[truckin151]

Thanks, Will it fit the same, great Idea! I'll price it today!

P.S. Still Zero Response from Moes.

Ditto, he's got til the 19th to at least say something back or paypal is taking my money back from him.

 

[03MopaRamman]

I think I got a weird name from like 3 years ago on there and Zero Posts, way before I started as MopaRamman on here and DF. I'll take a look!

 

[03MopaRamman]

Ok, logged, in, been, seen, read some posts, left the T-Shirt behind, feel ill, Fuckit, too much static, this Topic was supposed to be about installing my Cam to see if it will improve my set-up prior to doing the gears, so I'll post back when I get some news on when the Cam is arriving and when I will have time to do the install.

Ordered that 6.1 Oil Pump today Ken, it appears to look the same in the drawins and was only 53 Bucks, Taxes/in. Cam Bolt LOL was $1.60.

 

[KGBIGCOUNTRY]

They are the same housing I believe just a higher volume pump.

 

[Redtruck-VA]

Danny, are you doing a DIY on your cam change? If not, would you send me or post a list of tools, bits and pieces?
Thanks,

 

[KGBIGCOUNTRY]

Tool number 1 is a four post lift lol.

 

[03MopaRamman]

Probably not a DIY, but will take lots of Pics and add comment like I did with the TC Post-Up in MY Pics! When I did the 6.1 Cam I used the DIY from the HTC. It was straight forward. No Major screw-ups and have since learned a few other tricks I didn't now about the Topic. This time around I do not have to change my springs (Learned about proper tool for that from Frog/Teach) and hope the pickup tube will slide thru the opening in the Oil Pan without crackin her, we'll see but read that the 5.7 tube slides into new pump likadysplit.

So to finish answerin the question, there is the Detailed DIY by Weed on the 2ndary place of worship and he was sucessfull in doing it without the 2 Miller Crank Tools. Doesn't hurt to have the 03 Manua on hand for ref. I like the haynes cause it is a quick ref for fluid amounts and Torque specsl. Sure, I can post up list of what I have, and what I think I need.