No Power to Blend Doors

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Implicitfiber

Junior Member
Joined
Apr 29, 2022
Posts
2
Reaction score
0
Location
CT
Ram Year
2013
Engine
5.7
My truck leaked with the monsoons we've had in CT.... I think I traced it to the rear sharkfin but the water somehow came up through the a-pillar grab bar and into my dash.

Not sure if it's a coincidence, but all of my blend doors stopped working around the sametime. I pulled the front three and the new ones don't work either.

Heat is crapping out as well... Both pipes from the core are hot.

I know there's no fuse for the actuators and the dealership is three months out.... Does anyone have any idea?
 

GTyankee

Senior Member
Supporting Member
Military
Joined
Nov 2, 2020
Posts
10,151
Reaction score
12,800
Location
El Cajon Calif. 92021
Ram Year
2016
Engine
3.0 ecodiesel
The HVAC Unit gets its power from behind the passenger side Kick panel,
below the AM/FM antenna & the A panel

This is a video on the Control Panel


1697168867923.png
 
Top