p062a - CEL Fuel Pump A control circuit range

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

yohan

Junior Member
Joined
Jan 12, 2017
Posts
26
Reaction score
5
Ram Year
2013 Ram 1500 ST Quad 4x4
Engine
V6 3.6L Pentastar
I've been getting this CEL for a while, I've been clearing it daily, doesn't seem to go on in ways that I can replicate it - seems when I'm slow off the start or slowly accelerating the light will come on. No loss of power, accelerates fine, no increase in fuel consumption.

I was hauling my camper (TT) over this past long weekend and in tow/haul mode the light never triggered... if it did, I would have changed my plans for long weekend and tented as the last thing I want to do when hauling is run lean. Truck handled fine up one particular steep hill and was fine through the bush etc.

Did some poking around, could be fuel pump or some module - wondering if anyone can lend insight onto what steps I can take to troubleshoot before I take it in as the diagnosis is likely time consuming.

Thanks,

2013 Ram 1500 4x4 quad cab v6 3.6 pentastar 3.21 gears.
 
Top