Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Thank you I appreciate your advice.As long as its new and has that on the threads I just install it never an issue if you remove/then re install or something then i would use teflon tape.
No,but as JW said if it's been in and out once or twice probably,but i'd use pipe dope instead of teflon tapeAdvice needed. On OEM sensors that come with fitting sealant already applied is it recommended to also use Teflon tape? Specifically oil and coolant temp sensors.