Strictly the 4x4 lowering thread...

[BeanRAM]

I've been on the phone with several junk yards found one that has the 2011 front spindles 75 a piece aluminium these should work right?????

Sent from my SM-N920P using Tapatalk

Yes off a 2wd


Sent from my iPhone using Tapatalk

 

[predat-r]

Thank u sir I'm heading there know, they said it's off a 2wd 2011 less than 60k on it.

Sent from my SM-N920P using Tapatalk

 

[predat-r]

Got them 45 min drive........

Sent from my SM-N920P using Tapatalk

 

[predat-r]

I think I'm gonna luv that drop!!!!!!!!

Sent from my SM-N920P using Tapatalk

 

[charonblk07]

You'll be happy, and so will your inner CVs, eventually you'll want to go lower and that'll cost you a lot more more.

 

[predat-r]

I'm on 22"so lower is not What I'm looking at quite yet. I just want it sitting better cause with that front up a bit it feels like the tail is dragging just a lil.

Sent from my SM-N920P using Tapatalk

 

[predat-r]

You'll be happy, and so will your inner CVs, eventually you'll want to go lower and that'll cost you a lot more more.

Damn that's low.....nice.

Sent from my SM-N920P using Tapatalk

 

[predat-r]

May look into 24x10 lata on!!!!!!

Sent from my SM-N920P using Tapatalk

 

[BrBlack]

I have really got to get back on the hunt for some 2wd spindles.

 

[N1ck]

Predator, can you post before / after measurements for the 2wd spindle? I am considering this option.

 

[predat-r]

Before kit installed
Height front 36"
Height rear 39"

After install
Height front 35.25"
Height rear 35"

These are current measurements before 2wd spindle install. Will update at a lata time hopefully sooner.

Sent from my SM-N920P using Tapatalk

 

[predat-r]

Hit these with some flat black I had laying around.

Sent from my SM-N920P using Tapatalk

 

[16WhiteQC]

I've been enjoying the lowered life.......little different than I'm used to!

Ride isn't too bad on the GroundForce 9984 kit, little stiff, but all good for me.

Looks perfect!
(What color are the hellcats, Hyperblack or black?)

I have the GF 2/3 sitting here waiting to be installed, did the drop eliminate the side to side wallowing? My truck seems to float/wallow side to side on certain roads.

Can't wait to see what you have up your sleeve for the headlights lol.

 

[N1ck]

Hit these with some flat black I had laying around.

Sent from my SM-N920P using Tapatalk

Did you get these on yet? Very curious of the outcome!

 

[predat-r]

Doing them on Saturday hopefully!!!!!!!

Sent from my SM-N920P using Tapatalk

 

[N1ck]

Doing them on Saturday hopefully!!!!!!!

Sent from my SM-N920P using Tapatalk

keep us posted!

 

[Fatboy57]

Right now im stock 4x4 and looking at the mcgauphys 2 inch rear drop. Can i use stock shocks? Also will i need an adjustable panhard bar to center? Thanks

 

[16WhiteQC]

Right now im stock 4x4 and looking at the mcgauphys 2 inch rear drop. Can i use stock shocks? Also will i need an adjustable panhard bar to center? Thanks

Yes, you can run the springs with stock shocks

No, you don't need to upgrade the bar for 2" drop

 

[N1ck]

Doing them on Saturday hopefully!!!!!!!

Sent from my SM-N920P using Tapatalk

updates?!?

 

[predat-r]

Budyy got called into work on Saturday so could not use garage. Have a trip to NC. soon so it's on pause for now.

Sent from my SM-N920P using Tapatalk