What did you do with your 4th Gen this week?

[rossbourne14]

View attachment 127266put a carven exhaust on and the black 5 inch tips

I bet it sounds so badass and of course it looks it too

 

[Chris M]

I bet it sounds so badass and of course it looks it too

It sounds pretty good I almost want to run true duals and add another one

 

[rossbourne14]

It sounds pretty good I almost want to run true duals and add another one

make it to where i can hear you all the way in kentucky lol i like it

 

[JimsRamTruck2012]

Just top off the tank.

 

[DVC]

Mounted up White Knuckle rock sliders (thanks again for all the install help @Timmy01!) and Dethloff Mfg expedition rack.

 

[Pull Ya]

Just top off the tank.

At the current gas prices, probably about $50 worth????
Jay

 

[GottaBeKD]

At the current gas prices, probably about $50 worth????
Jay

I wish. $150 Canadian pesos to fill in Toronto. Closer to $170 in Vancouver apparently.

Sent from my SM-G955W using Tapatalk

 

[Pull Ya]

He was just "topping" his off---maybe he got away a little cheaper.
Jay

 

[Ramm5.7]

Gave the WhytRam a scrubbin today. Wash, claybar, inside front detail. Got it dirty again driving all over getting parts for tomorrows job and put in $75 of gas

 

[Jwithing]

Full seafoam treatment. 2.25 ounce per gallon in the tank yesterday. 7 ounces in the crankcase yesterday w/ 65ish miles ran through. Just sprayed the seafoam intake treatment earlier and changing the oil to redline 5w-30 w/ rp filter now.

The seafoam intake treatment was a ***** with the vararam. The hose kept popping off the bottle and I was burning the **** out of my fingers. Got a bit of smoke to start kicking regardless and let it hot soak, then took it for an aggressive run. At the end, seems like it was idling lower and smoother. If I feel frisky when I'm done, I'll pull the TB off and wipe my finger in the intake manifold to see if it took care of any of that gunk.

 

[CBTBOB]

Full seafoam treatment. 2.25 ounce per gallon in the tank yesterday. 7 ounces in the crankcase yesterday w/ 65ish miles ran through. Just sprayed the seafoam intake treatment earlier and changing the oil to redline 5w-30 w/ rp filter now.

The seafoam intake treatment was a ***** with the vararam. The hose kept popping off the bottle and I was burning the **** out of my fingers. Got a bit of smoke to start kicking regardless and let it hot soak, then took it for an aggressive run. At the end, seems like it was idling lower and smoother. If I feel frisky when I'm done, I'll pull the TB off and wipe my finger in the intake manifold to see if it took care of any of that gunk.

Please post before and after pictures if you can. Thanks.

 

[Spud2388]

My Bilsteins showed up as well as my HEAVY roll of MLV, 80mm butyl deadener, and 1 of the 3 rolls of CCF I ordered (kinda pissed as I can’t finish my deadening project because of this this weekend). Still waiting on my upper control arms to show up to get them painted and the lift put in. I guess it’ll be ripping apart my new sport this weekend though lol

 

[Jwithing]

Please post before and after pictures if you can. Thanks.

Already did the treatment, so there aren't any before pics. I thought about it but didn't feel like pulling my intake manifold off twice lol.

I added my oil and took it for a spin. I noticed immediately that the hemi tick was much quieter, but not gone. Also checked my oil level and it was at the bottom circle/add line while hot.... That seems low to me after putting 7 quarts in... 3 redline bottles did have a slight leak, but nothing substantial. You guys think I should buy another quart and toss half in?

 

[Jwithing]

After I changed my oil, went for a spin and for the first time since I've done my headers, actually had a chance to do a 0-60 run with the Trinity. I've also got the ATI on too now. Before all you haters jump on me for using a Trinity for 0-60, I know they're not accurate. My previous best was 5.63. This run was on a very slight incline as well and yes, my spedometer is slow by 1 mph because of the 37's. Launched in 2wd w/traction control off and I think I had full connection with the rubber.

 

[S0CAL]

After I changed my oil, went for a spin and for the first time since I've done my headers, actually had a chance to do a 0-60 run with the Trinity. I've also got the ATI on too now. Before all you haters jump on me for using a Trinity for 0-60, I know they're not accurate. My previous best was 5.63. This run was on a very slight incline as well and yes, my spedometer is slow by 1 mph because of the 37's. Launched in 2wd w/traction control off and I think I had full connection with the rubber.View attachment 127388

No hate here, very cool, especially w/37s.

 

[Gero]

Nice truck. Are those unpainted mopar fender flares? I have a white 1500 and am interested in the white on unpainted oem fender flare look.

Mounted up White Knuckle rock sliders (thanks again for all the install help @Timmy01!) and Dethloff Mfg expedition rack.

 

[Michael Deery]

Installed body side molding today... it is OEM, bought the molding on CARiD. I Like them. Now to decide if I want chrome wheels to key with the molding

 

[69GWC]

Installed body side molding today... it is OEM, bought the molding on CARiD. I Like them. Now to decide if I want chrome wheels to key with the moldingView attachment 127396 View attachment 127397

If you dont want to spend big bucks they make Wheel Skins to go over your stock wheels for about $70 bucks.

Picture when I first got them.

 

[DVC]

Nice truck. Are those unpainted mopar fender flares? I have a white 1500 and am interested in the white on unpainted oem fender flare look.

Thanks!

Those are the OE flares that come on the Rebel.

 

[R.L.K.]

Hauled a thousand lbs of quickcreat . I had 20 bags originally , I had used some by the time I took this photo [emoji16]

Sent from my SM-G930V using Tapatalk