What offset rim do I need?

[junyaah]

I have a 2010 ram 1500 4X4 that's been lifted. 6" rough country lift. I have the stock rims on it with 35 12.50 20 size tires.

I have a 1 inch spacer on all 4 wheels so they don't rub. No rubbing issues at all.

Its about time for some new tires and I think its about time to upgrade my rims.

What kind of offset do I need to order? I don't want the tires to stick way out. Right now they are about an inch out, that's fine. I don't want any more than that.

What would you recommend?

 

[2014greatwhite]

I run a 35x13.5r20 nitto ridge grappler on a 20x10 -24 offset moto Metal 970 with 4” zone lift and I have no rubbing. So I’d suggest -24.


Sent from my iPhone using Tapatalk

 

[BOWERSFJ]

20 x 9 with 0 offset ...I would probably do -12 if I did it again, just depends on what the wheel you like comes in ...


Sent from my iPhone using Tapatalk

 

[Robocop_9]

33x12.50x20 on 25 offset
I have 3” level


Sent from my iPhone using Tapatalk

 

[scott68fl]

-12 offset on these. 20x9. If I could go back would probably have bought 20x10s with - 12 offset.

Sent from my LG-H932 using Tapatalk

 

[Triumphx]

I’m going to guess you are currently running a -6 offset since stock is +19 and you have 25mm spacers. Look at where it is now and adjust. I would suggest -12 myself as i like to keep my paint in tact as much as possible.