What should I set bilstein 5100 at

[BADXMPLE]

Ok I'm back to a ram again I had a 09 laramie with bilsteins set @ 2.1 I bought a 2013 Laramie and the old owner has a 2" block lift so I ordered a new set of 5100's as I hear there a ball joint issues and don't want that. I don't want any vibration so should I stay with 2.1 or 2.8 any help is greatly appreciated.

 

[Rken1288]

I would remove the Budget Boost and set the Bilsteins at 2.1

That's what I have mine set at and I have zero vibrations. I would say many on this forum set theirs at 2.8 and report zero issues as well. It's a personal decision....probably can't go wrong either way.

Just my .02


Sent from my iPhone using Tapatalk

 

[BADXMPLE]

Yeah budget lift is getting thrown out bilsteins are already ordered

 

[Sean80]

Mine are at 2.1. I have a 3/4" rake. I think it looks great and I have no vibration or rubbing.

Sent from my SM-G920W8 using Tapatalk

 

[rdubs20]

set mine at 2.8 and 1.5 spacer in the rear. Rides better then stock to me. Either way you set them you can't go wrong with the bils. If you can afford it get the rear shocks with it.

 

[Pull Ya]

Mine are set at 2.1. Changed UCA at the same time.
Jay

 

[HemiPower36]

Mine are at 2.1. I have a 3/4" rake. I think it looks great and I have no vibration or rubbing.

Sent from my SM-G920W8 using Tapatalk

Same

 

[brandonjansen]

You won't have issues setting them at either height. Ball joints are rarely a problem with Bilsteins as the Bilsteins keep the suspension travel within OEM specs. Spacer kits allow the suspension to overextend which is where the ball joints pop out.

 

[BADXMPLE]

Yeah gonna set them at 2.1