Who is running 35x12.50 with -24 offset?

[tttrv]

Looking to see if anyone is running this combo with a level or 5100's, and if so does it rub anywhere at full lock?

 

[GlOcKnRaM]

I ran something similar..-18 offset and 35x12.50 with a 2.5" level and it rubbed bad! Rubbed the little metal tab for the door panel and all up on the plastic fender well.

 

[tttrv]

I ran something similar..-18 offset and 35x12.50 with a 2.5" level and it rubbed bad! Rubbed the little metal tab for the door panel and all up on the plastic fender well.

Would you say it was mainly due to the width or height of the tire?

 

[Tyler76]

I ve got 35x12.50 with -24 offset + lift 6 BDS - all's perfect

 

[GlOcKnRaM]

Well you've got a lift so you clear a lot more..I'd say height because it cleared the a arm and sway bar. But rubbed where I mentioned. But I also ran a Trail Grappler, not sure if an A/T tire would be a bit smaller!?

 

[Tylermar]

I have a 2.5" leveling kit with 1.5" wheel spacers with 35x12.50 on stock 17" wheels I have no rubbing at all even at full lock I even ran them with out 1.5" spacer for months it rubbed at full lock but I got by