PoMansRam
- Posts
- 2,045
- Reaction score
- 2,426
Latest activity Postings About
-
-
Not too many people have dug into them in great depth. However a couple owners have removed the cover plate of the electronic control... -
PoMansRam reacted to Wild one's post in the thread Transmission fluid and rear differential fluid change with
Like.
These are the factory instructions for the 8 speed if that's the transmission you have -
Very seldom can you not get the broken bolts out by welding a nut to them. Remflex gaskets are probably the best gaskets to use,as...
-
PoMansRam replied to the thread Exhaust manifold Leak.If this 2019 classic was like mine, it will have tie-bars between the manifold bolts and the manifolds themselves. If that's the case...
-
Dealers only use brand new parts,they won't do anything else.
-
Open or closed you will have pressure drop and for the record this is an open system oil pan to oil pan from open air inside engine
-
PoMansRam replied to the thread Oil Filter Relocation.^ 100% It's basic fluid dynamics. The more surface area the fluid has to "rub" against, push though, etc, the more resistance to flow...
-
PoMansRam replied to the thread MDS causing jerking and vibration.My 2019 classic is similar. Either I got numb to it in 61k miles or the power train tuned itself to my driving habits such that I don't...
-
Congrats. The lack of a push button doesn't bother me especially when considering everything that goes along with it like proximity...
-
I haven't been able to tell any difference in fuel mileage with the shudders out, on side roads, mountain roads, or longer interstate...
-
Dodge dealer. They said they borescoped it on the receipt and the wall was scored. I never spoke with the mechanic. Just said I was...
-
8 Speed
-
PoMansRam replied to the thread 2015 Engine Replacement.Does this truck have the 6 or 8 spd trans? In terms of an engine, like said, I wouldn't do it through a dealer. It will be 2x the cost...
-
The manifold outlets are the same. I think we saw the same machined part number for both at one time. I know the 6.4 truck engine has...
-
PoMansRam reacted to AE5548's post in the thread Exhaust manifolds backordered and heat shields "Impossible" to get? with Like.
Mine is an 18’ with 105k miles. So definitely time for the plugs.
-
-
Loading…
-
Loading…
