0W-20 is the recommendation from RAM Canada for winter use. it's what I run, and what most of the fleets I've worked with run.
A 5w is the next best option, and would be a compromise I'd consider only if I was looking for a 30 or 40 option. Other members here have various reason they run 30 or...
I'm just trying to make fun of the term ironic.
Alanis released a hit song ‘Ironic’ devoid of irony in any of the illustrations she offers. Which, in and of itself, is ironic, and she maintains to be her point.
It's not common, but there are a few places they break. One of the Youtubers mentioned earlier as having trained on the new 6 has a video on extracting a broken dipstick from a hemi.
You'll see it pop up here and on other forums from time to time...
and dipsticks break, which can be a royal PITA with our trucks.
There is a better chance of the computer monitoring the oil level than most owners using the dipstick. Ironically the people most likely to use a sensor are the ones most likley to neglect their oil, let it get acidic, increasing...
Direct injection engines brought to light issues with fuel quality additives quality and quantity declines BMW, GM, Honda, and Toyota teamed up in 2004 to identify fuels that still had enough detergents to keep their engines from having issues. Others eventually joined on.
Using recommendations...
Drivers pouring additives into the truck at terminals is no longer a thing, but additives still get integrated at most terminals. Depending on how the fuel is delivered to the terminals ethanol may also be added there.
The government of Canada has a fairly easy to follow overview of how the...
Many of the Canadian brands were disqualified after removing detergent from their lower grades, as Petro Canada was in 2019.
Chevron, Costco, Co-Op, and Shell make up a good chunk of the prairie markets. With Only 51% of Canadian gas stations are operated by their own brand consumers need to...
Changed the winter 17's to the summer 20's.
Sprayed some tremclad over a few of the rust spots on the frame welds and other easy to reach spots while I had the tires off.
I find it kinda funny that Alabama is the second-largest hydroelectric power producer east of the Rocky Mountains, given it only represents 9% of over all generation.
This link has pictures of several of Alabama's hydro projects...
Looks like lots of door panels in the junk yards in TX.
Seats tend to take longer to find in good shape for a good price. Keep in mind you don't have to swap the middle at the same time, and the other seats are the same.
The bulletin does not make a link between idling and DPF/DEF issues, nor does the bulletin discuss idling and any impacts or repercussions it may present.
To further complicate matters emergency vehicles are often not idling, they have loads applied keeping the RPM up.
Firetrucks have a surprisingly high engine failure rate when initially deploying to calls. I used to joke Firetruck is french for broken turbo.
While most equipment spends a lot of time running while deployed, PTOs and HD alternators put the engines under some load which helps longevity...
Above 0F the 750watts of heat the block heater puts out over a few hours does not help combustion or oil flow. It only takes seconds for your running 276,000watt engine to produce the equivalent heat, and your 15w-40 oil viscosity should not be a concern until -4F.
RAM recommends a block heater...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.