Recent content by TX_SHOCKER

  1. T

    random pop/slapping noise

    This pop / slapping sound started a few days ago while on a road trip. I put a camera by my suspension and don't hear any noise coming from the suspension area. I also put a camera in the engine compartment on the fuse box and can faintly hear the noise there. Anyone any have idea what it...
  2. T

    Lost throttle while driving. truck now wont start

    2010 Ram 2500 6.7 Cummins deleted. Ok yesterday I was driving on the highway and all of a sudden my throttle seemed to disappear. I could put it to the floor and no response. Pumped it a few times and then throttle came back and it drove like normal. drove about 50 yards and throttle cut out...
  3. T

    Authorized modification sticker

    Ok, well sounds like either way it's something I don't need to be concerned with anyways since I'm deleted and running a tuner lol. Thanks yall for the info Sent from my SAMSUNG-SM-N910A using Tapatalk
  4. T

    Authorized modification sticker

    There's the whole picture, didn't realize I cut off a lot of info with the other picture i highlighted
  5. T

    Authorized modification sticker

    OK with you mentioning that it was with pcm i did a search with pcm and that number and I finally got somewhere! So it looks like it was a software update? I have no idea what that info means lol
  6. T

    Authorized modification sticker

    Ok, so I've been trying to figure out what this decal means on my 2010 with a 6.7. I bought it used and saw it but never really gave it a second thought until the other day. Now it's bugging me. I've asked a dealer here ( not where I bought it ) and they said they had no idea what it meant...
  7. T

    Lets see those trucks flexing.

  8. T

    idle rough and then no start

    Ok, been busy (sorry) but truck is back running! Insurance was on the verge of telling me they were not going to cover it because it "falls under their negligence caluse" and even though I wasnt the one being negligent, it falls back on the fueling station and thats something I was going to...
  9. T

    idle rough and then no start

    [/URL][/IMG] [/URL][/IMG] [/URL][/IMG]
  10. T

    idle rough and then no start

    Just a quick update, it was dirty diesel ( actually it was gasoline that had been pumped into the diesel tank at the gas station ) have my insurance involved and im right in the middle of everything. Ill post update with how this goes so if anyone else has to go through this at least they can...
  11. T

    idle rough and then no start

    I'm hoping thats all it is! In between starts i drained my fuel filter and while i had it open i had the gf crank it over it to make sure fuel was getting there and it was, now it wasnt spraying out with a lot of pressure so maybe it was enough to fill but not enough to run. on my H&S tuner it...
  12. T

    idle rough and then no start

    truck is a 2010 2500 cummins with the 6.7 Ok so yesterday I got some fuel ( yes Diesel lol ) and got about $20 worth. Tank was at 1/8 before I got fuel. After I put the little bit in I drove a few errands without an issue. Came home and it sat for about 1 1/2 hours and then I went out to eat...
  13. T

    4 way flasher not working

    Well i ended up rigging up something to work. Behind the dash where the wirewires plug in to the dash I ran a jumper wire to a switch I mounted in cigarette lighter on the left. It basically just provides a ground to activate the 4 ways. It works just fine. I traced that wire and came to the...
  14. T

    4 way flasher not working

    Thanks! The link you posted im guessing is a wiring diagram? My work computers are lame and old and they wont let me view that picture on the page... but ill just look up TIPM on google to get an idea that way. Thanks again!
  15. T

    4 way flasher not working

    Ok, this has been driving me crazy for awhile and I am at the end of the road. I have a 2010 2500 and my 4 way hazard lights do not work. I tried to find a fuse for it, couldnt find one. I have tried to look up info about it and I only found that there is a multiswitch but cant find location for...
See more

Latest posts

Members online

... and 16 more.
Total: 1,427 (members: 66, guests: 1,361)
Robots: 1,663

Forum statistics

Threads
195,701
Posts
2,873,495
Members
156,581
Latest member
Rambunctious1

Share this page

Top