W
WASzuRAUCHEN
Junior Member 42 From Doha, Qatar
- Joined
- Last seen
- Viewing thread 2012 Hemi: No crank, no click, no code
- Posts
- 14
- Reaction score
- 1
Latest activity Postings About
-
-
WWASzuRAUCHEN reacted to Irishthreeper's post in the thread 2012 Hemi: No crank, no click, no code with
Like.
From my experience if you have electrical but no turnover it’s the battery or battery connection. Not enough there to engage the starter -
WHi, Just got my TIPM replaced after having had stalling issues over the past months. With the new TIPM installed, the truck runs smooth...
-
WWASzuRAUCHEN replied to the thread Occasional stalling without code.UPDATE: eventually gave up and brought it to the dealer. They pointed out the TIPM. Just got it replaced and truck runs smooth now...
-
WWASzuRAUCHEN replied to the thread Occasional stalling without code.Nope, key was on the seat. It’s an slt, no push start button. I’ll try again tomorrow and see if it cleared the code. If not I’ll have a...
-
WWASzuRAUCHEN replied to the thread Occasional stalling without code.Ok. Cleaned all connectors, undid the TIPM, cleaned that too. Realized while doing so that one of the connectors was actually loose. So...
-
WWASzuRAUCHEN reacted to Mister Luck's post in the thread Occasional stalling without code with Like.
The fuse block next to the battery has been checked for corrosion like discoloration greenish or white around the edges of the harness...
-
WWASzuRAUCHEN replied to the thread Occasional stalling without code.Weird stuff just happened. I cleaned up lots of connections ytd but it would still have this weird idle bumping between 550 and 600 rpm...
-
WWASzuRAUCHEN replied to the thread Occasional stalling without code.You mean if I have calibrated the TB? Yes, done upon installation.
-
WWASzuRAUCHEN replied to the thread Occasional stalling without code.Correct. But I know what I am going after since I was told from a two different workshops that it’s reading ‘lost connection’ codes...
-
WWASzuRAUCHEN replied to the thread Occasional stalling without code.I changed the throttle body, not the manifold. Somehow my OBDII reader doesn’t read any codes. But there is and was this U0100
-
WWASzuRAUCHEN replied to the thread Occasional stalling without code.Ok. Just spent some time cleaning connections and grounds and I have a feeling it might be the abs module. Now, I was checking for the...
-
WThat code is for ecm loosing communications with pcm. So, I would make sure truck has a good battery. A weak battery on these rolling...
-
WWASzuRAUCHEN reacted to 18CrewDually's post in the thread Occasional stalling without code with Like.
Could also be an erroneous code. Have you cleared it and it came back? Did you do any work lately and disconnected battery or alternator?
-
WWASzuRAUCHEN replied to the thread Occasional stalling without code.Yes, had it 4 weeks at an independent workshop that couldn’t come up with anything. Had it now 2 days at a different workshop with the...
-
WWASzuRAUCHEN replied to the thread Occasional stalling without code.Good point. I changed the old not for a sportier one but for one that works. The old one caused a lot of ETC issues which, I thought...
-
-
Loading…
-
Loading…
