trdt44
Member
So I figured it was time to start a build thread. This is my 1st Ram and Power Wagon. I have mostly been a Toyota driver with a few GM products thrown in. I have a hard leaving my vehicles stock and really enjoy modifying them. I have a Four Wheel Hawk Camper on order and should be getting it in about 6 months.
I picked up the PW December 23rd from Dave Smith in Kellogg, ID. Drove up there and back in the same day.
Here is the items I have currently installed or waiting to be installed.
Suspension
Thuren King 2.5 shocks with stage 3 valving
Thuren front 0.5" springs
Thuren front track bar
Thuren rear track bar
Thuren and Carli e-brake brackets (used both as the Thuren brackets left the cable rubbing on the gas
tank)
Air Lift air bags with Daystar cradles. (waiting closer for the camper delivery before install)
Tire/Wheels
Method 315 Wheels with the Ram specific offset (also black bolts so the fake beadlocks don't stand out)
37x12.5r17 Bfgoodrich Mud Terrain KM3 tires
Bumpers and Armor
Expedition One front bumper with full bull bar (Factor 55 fairlead and Cascadia flip license plate mount)
Expedition One rear bumper (without tire carrier, would not have worked with the camper)
Rigd receiver tire carrier
Maple front diff guard
Maple bar skid replacement (need to install)
Dethloff engine/transmission skid plate (on order)
AMP Power Steps (will eventually replace with sliders)
Electrical and Lighting
OEM aux switch panel from a non-PW truck
Bussman fuse/relay panel (mounted to a modified panel that was meant for a Tacoma)
Baja Designs XL 80 lights mounted in the front bumper
Baja Design XL Pro with their Ram pillar mount
Baja Designs Squadron Sports mounted in the rear bumper
I also plan to add an AGM Northstar battery, a second battery, sliders, and a CB or GMRS radio.
Here are a few pictures. Will work on getting some that are updated.
I picked up the PW December 23rd from Dave Smith in Kellogg, ID. Drove up there and back in the same day.
Here is the items I have currently installed or waiting to be installed.
Suspension
Thuren King 2.5 shocks with stage 3 valving
Thuren front 0.5" springs
Thuren front track bar
Thuren rear track bar
Thuren and Carli e-brake brackets (used both as the Thuren brackets left the cable rubbing on the gas
tank)
Air Lift air bags with Daystar cradles. (waiting closer for the camper delivery before install)
Tire/Wheels
Method 315 Wheels with the Ram specific offset (also black bolts so the fake beadlocks don't stand out)
37x12.5r17 Bfgoodrich Mud Terrain KM3 tires
Bumpers and Armor
Expedition One front bumper with full bull bar (Factor 55 fairlead and Cascadia flip license plate mount)
Expedition One rear bumper (without tire carrier, would not have worked with the camper)
Rigd receiver tire carrier
Maple front diff guard
Maple bar skid replacement (need to install)
Dethloff engine/transmission skid plate (on order)
AMP Power Steps (will eventually replace with sliders)
Electrical and Lighting
OEM aux switch panel from a non-PW truck
Bussman fuse/relay panel (mounted to a modified panel that was meant for a Tacoma)
Baja Designs XL 80 lights mounted in the front bumper
Baja Design XL Pro with their Ram pillar mount
Baja Designs Squadron Sports mounted in the rear bumper
I also plan to add an AGM Northstar battery, a second battery, sliders, and a CB or GMRS radio.
Here are a few pictures. Will work on getting some that are updated.