J_RAM
Junior Member
Have a 18’ Express. Looking to pull the trigger on some 2” Bora spacers. Boras are “the best” but will adding the 2” to each side actually destroy my joints? I need some tips. This is my first truck
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
1. It looks badass2” spacers?? Why on earth would you want to do that? Put more stress on your front end and sling more crap on your paint?
Your point 3 is only partially correct. Yes people run wide set ups and are fine. The thing you don't see with the wide set up is they are replacing front end components much soon that they would have to include wheel bearings.1. It looks badass
2. I ain’t taking this thing mudding so the paint is fine
3. Asking for polls and tips. I don’t want to cut the ruts down so 2” is the way to go. Some people run way wider and agressive setups and are fine
I agree. I run them on my 2500 and had them on my 1500. Just remember to check them and retorque when you do a tire rotation.It won't "destroy" the balljoints.....sure, it will put more stress on them and increase the wear, but so would wider and more offset rims and bigger tires.