What did you do with your 4th Gen this week?

Bandit517 · Feb 18, 2023

My final stopping point for the night after about a dozen times of saying I was done for the night. The last straw was reaching the point of cutting the exhaust to install the long tubes. So maybe with some luck I can start it tomorrow before work. I still don't have my tuner dilemma resolved but if this DiabloSport/HemiFever hiccup can't be readily resolved I'm going to find someone local and handle it with HPTuners like I should have from the beginning.

Bandit517 · Feb 20, 2023

All done. Just gotta tune the pig. And get a different muffler. Carven Progressive is too loud now for my liking with the long tubes and no cats.

Socalramfan · Feb 20, 2023

Bandit517 said:
All done. Just gotta tune the pig. And get a different muffler. Carven Progressive is too loud now for my liking with the long tubes and no cats. View attachment 514070 View attachment 514071

That’s some quick work.

Would love to hear a sound bit with the Carven and your set up. :favorites37:

t0ymach1n3 · Feb 20, 2023

Man it's been a long ass time since i've posted here, but I've got a full red LED interior light thing going on, installed my own vinyl stripe (I know it's not exactly straight. First time ever doing it), ATI 15% underdrive pulley, PLX wideband and dual steering wheel gauge pod, SRT 10 reps with Toyo Proxes ST III in a 305/45/R22 and ARH 1 7/8in long tube headers with full 3in 304 stainless steel tubing to a muffler and that's it. No tips or resonators. I also found an amazing deal on an OEM sport hood that I intended to paint match, but when I installed the stripe and stepped back to look at it, I fell in love. I was gonna go all black, but there is something about the white hood with a fully black truck that is different and I think looks badass.

Bandit517 · Feb 20, 2023

Socalramfan said:
That’s some quick work.

Would love to hear a sound bit with the Carven and your set up.

https://flic.kr/p/2ohXbQr

Best I can offer at the moment. Sounds perfect at idle. But the short cruise around the block I gave her a small pull (about 3/4 throttle) and quickly realized it's far too loud for my tastes.

Maverick35 · Feb 20, 2023

Went to Lowes twice for some lumber ...never seem to get enough the first time ‍

Socalramfan · Feb 20, 2023

Bandit517 said:
https://flic.kr/p/2ohXbQr

Best I can offer at the moment. Sounds perfect at idle. But the short cruise around the block I gave her a small pull (about 3/4 throttle) and quickly realized it's far too loud for my tastes.

Oh yes… That thundering sound :waytogo:

But I can certainly see how giving it throttle would open up the skies.

Socalramfan · Feb 20, 2023

t0ymach1n3 said:
Man it's been a long ass time since i've posted here, but I've got a full red LED interior light thing going on, installed my own vinyl stripe (I know it's not exactly straight. First time ever doing it), ATI 15% underdrive pulley, PLX wideband and dual steering wheel gauge pod, SRT 10 reps with Toyo Proxes ST III in a 305/45/R22 and ARH 1 7/8in long tube headers with full 3in 304 stainless steel tubing to a muffler and that's it. No tips or resonators. I also found an amazing deal on an OEM sport hood that I intended to paint match, but when I installed the stripe and stepped back to look at it, I fell in love. I was gonna go all black, but there is something about the white hood with a fully black truck that is different and I think looks badass.

View attachment 514115
View attachment 514116
View attachment 514117
View attachment 514118
View attachment 514119

You’ve been busy. Looks good :waytogo:

Random_Walk · Feb 20, 2023

Just picked this little beast up (Took the picture in a Walmart parking lot on the way home, waiting for the wife to pick up some stuff...)

Bandit517 · Feb 20, 2023

Socalramfan said:
Oh yes… That thundering sound

But I can certainly see how giving it throttle would open up the skies.

Now that I FINALLY have my DiabloSport working correctly and sent my files to HemiFever I should be able to put some miles on it soon. But I noticed this morning it didn't stall while in gear so I'm gonna risk taking it for lunch in a bit and see how it drives.

(Cold start video)

20230220_152301

Explore beretta2fast4u's 24 photos on Flickr!

flic.kr

natehate · Feb 20, 2023

washed my truck yesterday to reveal some lowlife had hit it

t0ymach1n3 · Feb 21, 2023

Socalramfan said:
You’ve been busy. Looks good

I always stay busy for sure lol. Tonight it's getting my Cresspo Hemiwing ready to install for a charity car show this coming weekend. Then we've got a FRP cam kit and supporting parts going in before WAM2023 in March. I hope. Fingers crossed :badger_1:

nlambert182 · Feb 21, 2023

Socalramfan said:
For what it’s worth, I wouldn’t mind seeing the switches. Can provide others with some ideas as well

Sure. Don't mind the dust. I haven't had a chance to wipe the interior down this week. Thick zip ties do work well in a pinch in place of hog rings, if anyone ever wonders.

Socalramfan · Feb 21, 2023

nlambert182 said:
Sure. Don't mind the dust. I haven't had a chance to wipe the interior down this week. Thick zip ties do work well in a pinch in place of hog rings, if anyone ever wonders.

Nice job, looks clean and oem :waytogo:

danielmid · Feb 22, 2023

Diode Dynamics SS3 Sport yellow fogs installed at the edge of a storm last night, very happy with them.

Also decided I wasn't happy with the fuse panel mounting method I had going so I'm redoing that, picked up some aluminum and did some cutting and fitting. The circuit breaker is moving to up near the battery, and a neg bus bar and a positive terminal are going on that side. Parts should be here this week to finalize the install and get my garbage light bar working again. Side note, people sure do give you some weird looks when doing metal cutting/drilling in an apartment complex parking lot.

Socalramfan · Feb 22, 2023

danielmid said:
Diode Dynamics SS3 Sport yellow fogs installed at the edge of a storm last night, very happy with them.
View attachment 514335

Also decided I wasn't happy with the fuse panel mounting method I had going so I'm redoing that, picked up some aluminum and did some cutting and fitting. The circuit breaker is moving to up near the battery, and a neg bus bar and a positive terminal are going on that side. Parts should be here this week to finalize the install and get my garbage light bar working again. Side note, people sure do give you some weird looks when doing metal cutting/drilling in an apartment complex parking lot.
View attachment 514334

The snow is coming your way today :waytogo:

danielmid · Feb 22, 2023

Socalramfan said:
The snow is coming your way today

Gonna delay the parts another day or two I'd reckon. Not like I want to be wiring in the snow anyways

Socalramfan · Feb 24, 2023

Finally got the Kenwood installed with front and rear cameras, as well as an additional plug for the trailer rear camera :waytogo:

Shawn Burns · Feb 25, 2023

Removed my Edge Pulsar and pedal commander in preperation to add an I3 and hemifever tune. Boy, is the truck borring now! I don't know how anyone can enjoy driving them stock?

tones2SS · Feb 26, 2023

Ordered this kit for winter washing only.
I'm sick of driving to the touchless car wash, spending 18 bucks, getting an "okay" wash, and then driving home. Plus, I would rather much do it myself on my driveway and have all the tools that I need at my fingertips. I will use the detail spray, Beadmaker as a drying aid, which should help in the colder months. This kit is just for the winter months as I will do my normal hand wash during the nice weather months.

p-and-s-absolute-launch-kit-w_bucket-web_2bce18a4-cada-408d-93db-ab6118e5f6c8.jpg

What did you do with your 4th Gen this week?

That Trials Guy

That Trials Guy

Senior Member

Senior Member

That Trials Guy

Junior Member

Senior Member

Senior Member

...what's this bolt do? *plink* ...oh.

That Trials Guy

Senior Member

Senior Member

Senior Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Forum statistics

Share this page

...what's this bolt do? plink ...oh.