Search results

  1. Jesse1031

    Evic stopped working after battery change

    Crash68 I appreciate the information. Everything works fine, just that one tab on the evic that normally has the temperature read out, turbo psi etc does not work. I will try and drive it going into the weekend and see what happens. Hoping is something simple like this.
  2. Jesse1031

    Evic stopped working after battery change

    Hoping you guys might have some insight on this one. Went out 2 days ago to head to work and the truck was dead, only got a click. Had to jump it to get it going. Once started the evic was completely blank, according to the dealership this is normal on these trucks with a low battery. Ended...
  3. Jesse1031

    Factory running board pads

    Daveray9, those appear to just be the 25" ones. I have the full length ones that run the length of both doors. Do you know if they are interchangeable?
  4. Jesse1031

    Who all uses their trucks like a truck!? Let’s see pics!

  5. Jesse1031

    Laramie Leather Scratch Help

    Great looking results. I have the same truck with some slight scratches on the drives seat and lid. I may just give this a try.
  6. Jesse1031

    What's your gas mileage with 3.92 gearing and the 5.7?

    I had a 2017 with the 3.92's. When it was stock I would get high teens on freeway. In town was usually mid teens. Had a lot of pull off the line though. Towed my boat and trailer good for what it was. I specifically searched out the 3.92's because I eventually lifted the truck and put 35"s...
  7. Jesse1031

    Buying 2500 - Need Insight (Cummins vs. Hemi)

    I have a 28' travel trailer that I tow regularly. I have never had the 6.4 but I did have the 5.7 that I had when I first got my trailer. While it would pull it, it wasn't fun by any means. Any hill or slight inline and the motor was screaming just to maintain any speed. Bear in mind my...
  8. Jesse1031

    Factory running board pads

    I have full length factory Ram running boards on my 2500, cab to cab. The drivers side pad has begin to crack and is starting to break. I would like to just replace the pad, but have been unsuccessful in locating a replacement. I even called the dealer and they were not sure on it. I see the...
  9. Jesse1031

    6" procomp on night edition

    I was looking at this myself this morning. I have nothing to compair to as far what the preload space looks like. Does anyone have a picture of theirs?
  10. Jesse1031

    6" procomp on night edition

    Here's pictures of the front and rear. MarshRam, I wondered the same thing.
  11. Jesse1031

    6" procomp on night edition

    I will get them up tomorrow.
  12. Jesse1031

    6" procomp on night edition

    Being it's a stage 1 kit it uses spacers up front. Using the stock shock currently. The shop I had install it really made me second guess thing, hence why I dont wanna take it back to them. I have a 4" space up front and a 4.25" block in the rear.
  13. Jesse1031

    CAI recommendations

    Thanks for the input guys I realize the question has been probably beat to death. With the vararam what kind of real world result are you guys seeing?
  14. Jesse1031

    CAI recommendations

    I have a 17' 1500 sport with the 5.7, looking to do a CAI for better MPG and performance. Pushing 35's. Living in California I am limited with the CARB compliant stuff, though I have thought about putting what I want then just putting the stock back on for smog testing. What are you guys...
  15. Jesse1031

    6" procomp on night edition

    I have a 17' sport night edition that I had a procomp stage 1 installed on. Everything I read was that this should have level the truck out pretty close. However I still have a significant rake, close to 2.5" higher in the rear of the truck. I had additional spaces on the rear that I pulled...
  16. Jesse1031

    Zone 6" prices?

    Was quoted 2500 a few days ago. I would shop around some.
  17. Jesse1031

    4" Lift on 33-34" tires

    I have the 3.92 LSD in my 17'. Looked long and hard to find this set up, but they are out there.
  18. Jesse1031

    Bilsteins and 2017 1500

    Thinking I finally have the wife convinced on a 4" :happy107:
  19. Jesse1031

    Bilsteins and 2017 1500

    Thanks for the info. Now its just a matter of whether to level or just drop the cash and lift it.
  20. Jesse1031

    Exhaust for my 2017 Ram 1500 Night

    Just put a 10 series Flowmaster on my night edition. Love the sound. Not too loud in the cab but comes alive when you get on it.
  21. Jesse1031

    Quad Cab vs Crew Cab

    Had a 11' quad cab. While it was a great truck I hated the small cab. My daughters car seat would hardly fit in the back seat, leaving the passenger front seat unusable. Just picked up a 17' crew cab with the longer bed. Love the extra room without sacrificing bed space. Would have custom...
  22. Jesse1031

    Bilsteins and 2017 1500

    That kinda what I was figuring. I didnt think they changed much, if anything between 16' and 17'.
  23. Jesse1031

    Done so Far

    Like how it turned out. Picked up the same truck but in silver. Just got my exhaust done and have been looking into the lifts. Been back and forth between 4" and 6". Really like the 4" on your setup. Hood decal as well!
  24. Jesse1031

    Bilsteins and 2017 1500

    Guys I need some help on this. Local shop told me that I cant run the bilsteins on my 2017 sport. Apparently they dont make them. Issues with the UCA. I can only do a 1.5" spacer kit which really is not what I was looking at. Has anyone done bilsteins on their 17' or is there some truth to...

Latest posts

Members online

Total: 1,253 (members: 47, guests: 1,206)
Robots: 1,833

Forum statistics

Threads
195,657
Posts
2,873,015
Members
156,508
Latest member
Uwe-RAM-2016

Share this page

Top