Thanks for the replies. Fluid level is ok. My thoughts too are initially a sticky piston. Didn't think about the proportioning valve but it sounds like a credible diagnosis. I'm just gonna take it back to the dealership since its still under warranty. If they can't get it right this time then...
Hey All:
I'm having a problem with my 2016 Bighorn. When I'm coming to a stop and braking normally the brakes will work normally then suddenly seem to grab at around 40kmh and continue to grab right up to the stop. The truck also grabs at the stop a little no matter how hard I try easing up at...
Thanks for the suggestion. I checked each wire independantly using the dash bracket nearby as a ground. both were getting normal voltage. I remember reading that the resistor was on the ground side of the motor. From what I understand it controlls the voltage by pulsing the ground at different...
Thanks for the reply. I went to carquest and bought another blower motor. hooked it up to the harness and it also does not work. I am indeed getting 12v on both sides of the blower motor. i hooked the old motor back up and after a few minutes it came back on so my guess is I need to look...
Hey all:
So a little history on my issue. I bought my 2009 1500 laramie about a year ago. it has dual zone auto climate. Around 8 months ago the blower motor started to work intermittantly. It finally died for good about 4 weeks ago. I was getting proper voltage at the motor but it was clearly...
Thanks for the replies. I have tried it at different angles and have hit it with penetrating oil for several days. From what I understand it has to be at roughly 10 degrees or so. The plastic grommet basically just fell out and is brittle and desinegrated. I suspect there are still pieces stuck...
Went to take my tailgate off my 2009 for the first time the other day and for some reason it will not come off the left side hinge. I'm pretty sure I'm doing it correctly as I watched several videos on the process. The right side comes off no problem (the side with the notch) but I have...
Indeed. @patchelect linked me to the part page. Thanks for the replies. Didnt know it was the beeper too. Anyone know how I could test mine? Can't find a schematic for the pinout and I'm not getting anything from a continuity test.
Yeah I heard the odb readers won't do it. Will probably just take it to my mechanic to get it diagnosed before I start throwing too many parts at the problem. Will the sensors still click in reverse with a faulty connection? I was under the assumption that the clicking indicates the sensors are...
The park assist error was showing when I bought the truck but one of the sensors was physically damaged so I figured that was most likely the problem. All sensors were clicking in reverse except that one. Changed it and it too is clicking now but the system is still not working. This truck had...
@BWL do you mean the lines on the back up camera display? Even though my park assist is throwing up an error I still have the lines show up on the display.
@patchelect THANK YOU!! This helps me get one more step closer in trying to diagnose my park assist fault. Wasn't sure it was a component of that system or not. I think it has 4 lights that illuminate and correspond to what sensors are picking up an object. Now to pull out the volt meter and see...
Hey all:
I recently bought a used 09 Laramie and have been wondering what the interior part just above the sliding rear window is for. It looks like an infrared bar or something. I have heard that it maybe for the auto climate control or maybe has something to do with park assist. Any Ideas...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.