Search results

  1. Canadian Mopar

    5th Gen Seats into a 4th Gen?

    Yes, they still have the same cab so alot can be interchanged and will physically fit. The electronics is where you'll possibly run into problems. As far as your question, seats and door panels are an easy swap, dash and center console would be a different story.
  2. Canadian Mopar

    5th Gen 8.4 UAV Radio in a 4th Gen (And Possible Surround View)

    wow, that's awesome that you got the dash to work. Assuming just lots of custom wiring/harness' to make it work?
  3. Canadian Mopar

    Moe's Performance

    Ya been thinking about the same thing. Received half my order but still haven't been able to get in contact and haven't heard anything about the other half of my order. I'm not in a huge rush, and understand the situation, but definitely some kind of response would be nice.
  4. Canadian Mopar

    Additional UAQ/UAS Update Files 28.3/30.24/34.2

    What all settings did you change in Alfa? I updated to 39.5 on my UAQ the other day and performance pages is there, but when I go into it, it says that the performance pages are unavailable at this time and offroad pages have yet to show up yet.
  5. Canadian Mopar

    How To: Add Factory Keyless Enter N Go

    Even with the old fob ignition it should be smart start, like what you're talking about on your other vehicles, but perhaps because your truck is a manual they don't have that enabled. Only thing I could see.
  6. Canadian Mopar

    Power steering reservoir bracket?

    So I just put my engine back in my truck after a rebuild (6.4L BGE) and I have this one bracket left over, I obviously forgot to take a picture or label where it came from but if I look it up in the parts listing it is listed as a power steering reservoir bracket, I'm not entirely sure if that's...
  7. Canadian Mopar

    2019 HD Tail lights in a 4th gen

    Assuming you have to have the '20+ BSM modules for that to work?
  8. Canadian Mopar

    6.4L Cam Experiences / Testimonials

    I have my 6.4L out of my 2500 Ram ATM, had a bad / weak lifter that was causing all kinds of racket. Anyways so just in the process of collecting parts and I I'm looking at massaging this thing a little while I got it out. Looking at doing a MDS delete and cam swap (have headers and a couple...
  9. Canadian Mopar

    American Racing Headers at Got Exhaust

    Do you still carry these? Interested in a set of long tubes for my 6.4L.
  10. Canadian Mopar

    6.4L HEMI issues, stumped.

    Awesome, thanks, always reassuring that I'm thinking along the right through process here and not chasing a problem that was only in my head haha. But ya that lifter does feel pretty terrible, I can't see how it would have been able to operate correctly like it is. It would also make sense as...
  11. Canadian Mopar

    6.4L HEMI issues, stumped.

    Hey guys thanks for the insight and guidance here, I went back and double checked some stuff today and think I may have found the problem. So on this lifter (left) it was actually stuck in the "down" position I guess you'd say, I was able to get it to partly come back up, but as you can see...
  12. Canadian Mopar

    6.4L HEMI issues, stumped.

    No, I did not unfortunately, from all I had read with the cam and lifter issues on these HEMIs and the combo of rough idle, CEL, and very noisy top end I figured that was the problem.
  13. Canadian Mopar

    6.4L HEMI issues, stumped.

    I did a quick visual on the springs, push rods, and value seats and didn't see anything unusual but I'll take a closer look, thanks!
  14. Canadian Mopar

    6.4L HEMI issues, stumped.

    Yes I cleared the CEL after that incident, but the rough idle and noisy top end were on and off. I didn't drive it a whole bunch after that but one time I'd start it and it'd be back to normal, and the next, or sometimes 5 minutes later it'd be back, or vice vera, almost like one of the lifters...
  15. Canadian Mopar

    6.4L HEMI issues, stumped.

    It was around freezing, so not that cold, especially for up here. I had been a fair way into a road trip as well so everything should have been well up to temp. I will say as well that when my CEL light came on I was passing on the highway and had my sock in it with a trailer behind so it was...
  16. Canadian Mopar

    6.4L HEMI issues, stumped.

    Oh no, sorry that was another code that popped up at the same time as all this started, so both the P1521 and P0307 codes.
  17. Canadian Mopar

    6.4L HEMI issues, stumped.

    Awesome thanks, ya the manifold bolts being in tact surprised me as well. No I didn't check coils or plugs as it sounded pretty metallic and I thought for sure it was a lifter / cam issue.
  18. Canadian Mopar

    6.4L HEMI issues, stumped.

    Kind of what I figured as well, thanks. I had the misfire code and a P1521 - incorrect oil type code. I've always ran spec 0W-40 in this engine so not sure what that was all about.
  19. Canadian Mopar

    6.4L HEMI issues, stumped.

    I have a 2017 Ram 2500 with the 6.4L HEMI, just rolled over 140,000 km and while towing a trailer a few months ago I got a CEL with a cylinder misfire code on #7, when this happened there was a noticeable tapping noise in the top end, to me it sounded like #7, and the engine started to idle...
  20. Canadian Mopar

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    Yes, the 19+ HDs still use the same seat bases (and foam actually) as the 09-18 trucks. (I'm in the process of re-skinning my '17 seats w/ brand new skins from a 19 HD and they fit perfect). You will probably need to rewire a little bit as I'm sure they changed that, but 1500, 2500, etc won't...
  21. Canadian Mopar

    DIY - add Auxiliary switches to a 2016 RAM 2500 Tradesman

    Benny posted a doc with all the different switch banks over in the vendor section. All the switch banks can be used on 1500-5500, no difference except the different options. https://www.ramforum.com/threads/auxiliary-switch-bank-application-chart.149033/
  22. Canadian Mopar

    AlfaOBD

    I think I fixed that by changing the com port. https://www.ramforum.com/threads/alfaobd.123982/page-9#post-1791893
  23. Canadian Mopar

    Adding cooled seats

    haha that's an old post, I actually did get them to work in my '11 but have since upgraded to a newer truck. Thanks tho!
  24. Canadian Mopar

    5th Gen Seats into a 4th Gen?

    The 19+ HD seats should be more or less plug and play. Might want to double check the wiring but the seats and the mounts are the same. The HDs are still using the cab from a 10-18 truck, they just added a similar interior to the 5th gen 1500s in it. The true 5th gen 1500s use an entirely new...
  25. Canadian Mopar

    AlfaOBD

    I had the same problem when I tried using the PC version. Change the Interface to OBDLink instead of OBDKey (if you're using the MX).

Latest posts

Staff online

Members online

Total: 1,176 (members: 44, guests: 1,132)
Robots: 1,811

Forum statistics

Threads
195,619
Posts
2,872,644
Members
156,451
Latest member
Mdinsmore

Share this page

Top