4.7l

  1. 2005

    2005

    Dodge Dakota SLT, Crew Cab, RWD, 4.7L Magnum V8, 158,000 miles
  2. L

    Headers for RAM 1500 4.7L 2013

    Hello everyone, I would like to install headers on my 2013 Dodge Ram 4.7L, I found headers up to 2007 on the sites. Can I install headers designed for 2007 or less on my RAM? Thx for your help !
  3. J

    changing spark plugs advice

    i have a 2012 4.7l v8, i am wanting to change my plugs and have bought 8 wires and 8 plugs. I'm reading that some models need 16 total, would this be true for my RAM? just to be clear, its not a hemi. any sort of advice would be much appreciated as i don't want to rip out the plugs prior to...
  4. L

    No crank no start

    Hello, I have my 2013 Ram 1500 4.7l have a no crank no start issue. So, backstory, I do landscaping on the side and have three yards on one street, two of which are next-door neighbors, but the houses are just about 2-3 blocks away from each other. Drove up to my first yard, did leaf clean up...
  5. Lord_Brick

    How can I get more power, as in horsepower or torque, out of a 4.7 magnum

    I have a 4.7 magnum in a 04 single cab short box that is a powerhouse for the size of the truck but I feel I can get more horse or torque out of it. Any suggestions, I do not want to "upgrade" to a hemi.
  6. G

    My 2004 1500 4.7L 2wd feels sluggish, like something is holding it back when accelerating

    My 2004 1500 4.7L 2wd feels sluggish, like something is holding it back when accelerating. In 2006 I had a 2004 1500 4.7L 2wd for a work truck. It drove very well. About 2 years or so ago I got a smoken deal on a 2004 1500 4.7L 2wd quad cab. It needed a lot of work but it is running and...
  7. Jademoon1981

    02 1500 4.7 45RFE wont shift

    02 ram 1500 4.7 4x4 45RFE transmission. Long story here: got to work wouldnt start, changed fuel pump corrected that issue, about 2 days later speedometer stopped working, changed sensor on Rear pumpkin, got that resolved. then again a few days later and came home parked and went to go to the...
  8. J

    2004 Ram 1500 4.7l auto to manual transmission swap help

    I have an 04 Ram 1500 with the 4.7l V8 and 213k miles. I am preparing to do a total engine rebuild soon. I have always wanted to have a truck like this with a manual transmission. My first truck was a 94 F-250 with a 5 speed, and I enjoyed that, but the granny low gear wasn't the most fun...
  9. Jokybrto

    ***2011 RAM 1500 Truck Build With a Bunch of new Goodies***

    Good morning, I'm new to the Forum. I inherited my Dads 1500 RAM 3 years ago after he passed away. My Dad and I talked about upgrading to the dual exhaust and bumper on his Standard cab (We never got around to it before he passed). Not making this into a sad story, but a happy one... I decided...
  10. Sun_Devil375

    Dead Hole 4.7L

    I have a 2004 ram 1500 4.7L non flex fuel. I recently took it into a dealer to get the two airbag recalls taken care of and when I got home I looked over the paperwork they gave me. They never mentioned anything to me in person but on the inspection report it notes I have a dead hole in my...
  11. G

    4.7 engine life span rating

    I have a 2011 Ram 1500 with the 4.7L motor that has 245,000 on it. Does anyone know what the factory rating is for rebuild on this motor, or lifespan expectancy?
  12. HollisterVN

    4.7 Tossed a lash arm rocker--causes/additional damages?

    I recently purchases a 2002 4.7l Ram 1500 last May. it had a fair share of issues but most were small and easy to fix such as replacing spark plugs and fuel injectors and lift tap. Recently i started it up and it idled EXTREMELY rough and had a distinct slapping sound, the car has a hard time...
  13. S

    Solid Lifters on 4.7l with upgraded cam

    Do I need to install solid lifters when Im upgrading a cam on a 4.7l? from the spec sheet I have it only says it requires lash caps and it doesnt say anything about solid lifters. Is it pretty standard to need solid lifters when upgrading a cam?
  14. S

    Best Heads for 4.7l

    I just bought a set of crane 212x cams for my 4.7l and Im thinking about doing heads while im in there. I've seen the ported heads on airram.com but they seem overpriced in my opinion. Are there any other good options?
Back
Top