diagnose

  1. S

    Multiple Misfire 2009 Ram 1500 5.7 - Need Help

    Hi guys, new to posts and ram 5.7 truck in General. But basically my issue is the multiple misfire code I am getting, and it does not show me which cylinder is actually misfiring. I had got the truck for a fair price due to misfire on cylinder #5 and did all the basic tests and ended up needing...
  2. H

    Headlights issue help

    So for a week now my headlights been weird, I had one get weaker than the other which I was going to deal with but i didn’t get a chance to get to it. But it’s been switching from one getting weaker one the passenger side then after some drive cycles the left is strong right is weaker and then...
  3. D

    2005 Dodge Ram 1500 4.7 Head gasket or cracked head

    I have a 2005 Dodge Ram 1500 4.7 liter engine non-flex. I know in some capacity I am getting coolant into my cylinders. I'm not sure if my head gasket is bad or could it be a cracked head. I bought this truck used back in January so I don't know a lot of history on the truck, unfortunately. I...
  4. J

    U0140 code

    Hey all, recently got a code reader for a different vehicle but out of curiosity I plugged it in to my 2014 Ram 1500 express and code U0140 appeared. I have no engine light on, I did have the airbag light on but the connector under the driver seat was loose. Fixed it and went off. Everything is...
  5. R

    Oil sweating on the top of the engine?

    I recently noticed some oil sweat on the back of engine for my 2016 Ram1500 pentastar v6. It appears to be around the fuel injector? My truck has about 44k miles and about to run out of power chain warranty. Any idea what could be the cause of it and should I be worried? Thanks!
  6. J

    RA2 to RA3 CarPlay bugs

    I ordered a kit from infotainment.com, that contained a bezel, HVAC, 7 speed fan resistor, 911 assist over-ride, and all the necessary cables. I then got a radio from a guy on kijiji in order to save me 1000 dollars on not buying their radio. I am having a lot of problems after installing these...
  7. DizzyFranco

    What cause my ring gear wear to look this way?

    is there anything useful that can be learned from this wear pattern? if you are experienced with differentials, can you tell me what caused it? backlash too much or not enough? pinion depth? btw its a chrysler 9.25 axle side adjusters and i believe the pinion has crush sleeve. 96 5.9L v8 4x4
Top