07 powerwagon-rear axle wont unlock

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

wizardss23

Junior Member
Joined
Apr 20, 2015
Posts
7
Reaction score
6
Ram Year
2007
Engine
Hemi 5.7
Turned the switch to "unlock" and the indicator light that shows the rear axle is locked stays on and the light for the unlock position just blinks. And ideas??
 

xb1230

Hobby Mechanic
Joined
Aug 22, 2014
Posts
960
Reaction score
227
Location
South Shore of Montreal, QC, Canada
Ram Year
2020
Engine
5.7 HEMI
Is it actually still locked? could only be the sensor or actuator that is acting up and maybe the axle is actually unlocked.

Otherwise, it depends on what the actuator system is. If it is a pneumatic system (pressure or vaccum) then maybe the valve is stuck. Detach the air tube and allow for air to come in or out of the system.

If the actuation system is electric then you may have to verify if the actuator motor is stuck somehow. There should also be a way to detach the motor and actuate the system manually and potentially figure out what is going on at that point.

Follow the wire or tube... and good luck.
 
Back
Top