2007 Ram 1500 5.7 PCM repair needed.

[Will B]

Good Morning Gentlemen and Ladies if there are any,

2007 Ram 1500 5.7 Hemi check engine light on with a misfire on cylinder #7 P2320 Ignition Coil 7 Secondary Circuit-Insufficient Ionization code. Found a rodent had chewed through #7 coil wiring and #7 fuel injecter wiring. Repair the wiring to both and I still have a misfire on #7 with the P2320 code. Checked to make sure I have 14v. Checked the wiring between the PCM C1 pin 5 and fuel injector pin 1 on #7 the PCM C1 pin 3 and pin one of the #7 coil the wires checked good. Pin 2 on both the coil and the injector have 14v. Used a O-Scope and I have the firing pulses on cyc #1,#3,#5 for both the injector and the coil. Nothing on #7 coil or injector. At this point I'm leaning toward the PCM channel #7 is bad. I suspect the wires shorted together and took out channel 7 on the PCM. My question is where can I send the PCM for repair. I've read horrible reviews on Flagship One. I was hoping someone has a company they trust.

Thank you in advance.

 

[Fast69Mopar]

Good Morning Gentlemen and Ladies if there are any,

2007 Ram 1500 5.7 Hemi check engine light on with a misfire on cylinder #7 P2320 Ignition Coil 7 Secondary Circuit-Insufficient Ionization code. Found a rodent had chewed through #7 coil wiring and #7 fuel injecter wiring. Repair the wiring to both and I still have a misfire on #7 with the P2320 code. Checked to make sure I have 14v. Checked the wiring between the PCM C1 pin 5 and fuel injector pin 1 on #7 the PCM C1 pin 3 and pin one of the #7 coil the wires checked good. Pin 2 on both the coil and the injector have 14v. Used a O-Scope and I have the firing pulses on cyc #1,#3,#5 for both the injector and the coil. Nothing on #7 coil or injector. At this point I'm leaning toward the PCM channel #7 is bad. I suspect the wires shorted together and took out channel 7 on the PCM. My question is where can I send the PCM for repair. I've read horrible reviews on Flagship One. I was hoping someone has a company they trust.

Thank you in advance.

I have used "Go ECM" in Grand Prairie, TX a few times to repair the NGC PCM's that are used in the 2006-2008 DR trucks with good results.

 

[DILLIGAF]

Just buy other one, not even worth wasting you time shipping one somewhere.

05094405AL 07 DODGE RAM 1500 PCM 5.7L 4X4 PROGRAMMED ENGINE COMPUTER MODULE ECM | eBay

Find many great new & used options and get the best deals for 05094405AL 07 DODGE RAM 1500 PCM 5.7L 4X4 PROGRAMMED ENGINE COMPUTER MODULE ECM at the best online prices at eBay! Free shipping for many products!

www.ebay.ca