09WHITESPORT
Junior Member
- Joined
- Oct 17, 2017
- Posts
- 14
- Reaction score
- 1
- Ram Year
- 2009 SPORT
- Engine
- HEMI 5.7
As the title says, I have a 2009 Sport 1500 4x4 that has a slight level on the stock shocks. I was replacing the driver side wheel hub and noticed the cv axle boot was torn. So I thought why not kill 2 birds with one stone.
The only problem was once I tried to remove the original driver side cv axle, it started to pull the intermediate shaft out of the transfer case. I know I could always take my time and cut the original axle off around the c clip that I'm assuming the cv is stuck on. Open to any other suggestions.
The only problem was once I tried to remove the original driver side cv axle, it started to pull the intermediate shaft out of the transfer case. I know I could always take my time and cut the original axle off around the c clip that I'm assuming the cv is stuck on. Open to any other suggestions.
