2010 Dodge Ram Dual Headlight Wiring

[jonblake03]

Trying to add Halo lights to my 2010 dodge ram but I don’t wanna guess which wire to splice into for the power and ground. Does anyone here know for sure which one is which?

 

[jonblake03]

I’d assume the white/green is ground and the blue/black is power but I don’t wanna guess!

 

[jawzs2]

This site should help

Mopar Connection Repair Kit

connectors.dcctools.com

 

[jonblake03]

This site should help

Mopar Connection Repair Kit

connectors.dcctools.com

Thank you, I found it there!

 

[JcsMI]

Any chance you can share what you found? That link is not working for me. I'm trying to run leds with a two wire plug to the stock three wire.

 

[jawzs2]

Any chance you can share what you found? That link is not working for me. I'm trying to run leds with a two wire plug to the stock three wire.

Yeah, they changed the site - try this one

Mopar Connection Repair Kit

connectorrepairkit.mopar.com

 

[JcsMI]

Thank you. I found it. Any chance you can give a little guidance on how to hook up the three from this plug? I assume the middle goes to the middle. I've got a black/green for a middle on the truck. Next to it is a white/brown. And on the other side is a white/?. I can't see the stripe in the picture. The headlamps have a black middle, and red and and a green or green black. Heres the pictures. The black/red are for the drls.

 

[JcsMI]

Thanks for helping. I do not want to cut my plugs unless I know how to install the new ones. I would say middle to middle and maybe red to brown? them the other to the other.

 

[jawzs2]

Hopefully someone familiar with this can chime-in. I'm not familiar with adding DRL's, never did to it to either of my trucks.

 

[04fxdwgi]

Hopefully someone familiar with this can chime-in. I'm not familiar with adding DRL's, never did to it to either of my trucks.

Adding extra lights or using existing lights. I added DRL's to my '16 just using AlfaOBD and assigning my turn signal light as a DRL, on/off selectable from the radio screen vehicle setup menu.

 

[JcsMI]

The DRL is not too complicated. What I need to know is how to wire the three main bulb wires to the new three wires for the main bulb. I assume the middle goes to the middle. The red to brown/white? Not sure