2015 Shaking

[Pull Ya]

If you still think it might be the tires or wheels. have the dealer take the tires and wheels off a new truck on the lot and swap yours out, then drive it and see if you still have the problem.
Jay

 

[JimP]

I have done nothing but take back and forth to dealer balancing tires and wasting time.

I hate to even suggest this as other have offered up what sounds like some pretty good ideas.

I still think its tires and would take it to a tire shop. I'm not so sure that a dealership would be straight with you.

 

[SOKY_RAM]

I hate to even suggest this as other have offered up what sounds like some pretty good ideas.

I still think its tires and would take it to a tire shop. I'm not so sure that a dealership would be straight with you.

My dilema is that i have brand new wheels and tires. Just cant put them on until i lift it. Im not spending another dime on these goodyears. Ive got to call ram dealer on Monday to try to get them to swap a good set out. If that works I'll proceed w lift. If not I'll continue to fight the dealer. Thanks for all the suggestions!

Sent from my MB886 using Tapatalk

 

[DanM]

I finally got rid of most of the shaking in truck. I have been through 4 sets of tires and about 6 road force and 6 regular balance. Good year upgraded my tires to Adventure Kevlar AT tires and out of 4 tires 2 were out of round. I with a friend balanced them on regular hunter machine and finally got shake out of vehicle. If you road force tires make sure the smart balance on machine is turned off and its the way the tire sits on machine. So when you put tire on machine and snug tire as its coming down the colet(cone). But finally i am back to smooth ride.

 

[TruckNut]

I finally got rid of most of the shaking in truck. ........ Good year upgraded my tires to Adventure Kevlar AT tires and out of 4 tires 2 were out of round. I with a friend balanced them on regular hunter machine and finally got shake out of vehicle. If you road force tires make sure the smart balance on machine is turned off and its the way the tire sits on machine. So when you put tire on machine and snug tire as its coming down the colet(cone). But finally i am back to smooth ride.

I had a set of GoodYears that were .0040 out and they are the most out of round tire brand that I know of. Glad your shake is fixed....that was a lot of work and $ and time!

 

[FCA Master]

If you suspect a driveline issue remove the rear driveline and install a plug in the t-case and drive it in 4 high to see if anything changes. Reinstall the rear driveline and remove the front to rule out both.