3.7L 1500 Lift

[bhmman11]

Hey guys im new to the site and i have a 3.7 v6 and i would like to run a little lift really a level but maybe a 6in what are your guys thougts on this?

 

[Luke(MI)]

whow did you get a 1500 with a 3.7?

 

[bigbadram1500]

Welcome to the forum.

Lifts = awesome

 

[bhmman11]

They come with the 3.7 in 2003.... and thanks for the welcome i just wanna know whats the best lift for these trucks i know my truck has the dana rear end and driveshaft i just dont want to lose alot of power by lifting it.... i already have 33in Mud Grapplers on it i just wanna run 35s possibly 37s

 

[Bluesmoke91]

I have a 3.7 and wouldn't even think about lifting...talk about no power.

Sent from my DROIDX using Tapatalk

 

[bhmman11]

Honestly mine has a lot of power took it out mudding and it had no power loss.... I have hauled tractors and it has no problems.... I think it has lower gears in it

 

[Bluesmoke91]

Maybe cuz mine is pretty slow off the line and struggles somewhat getting up hills and stuff

Sent from my DROIDX using Tapatalk

 

[The Assassin]

I wouldn't put 37's much less 35's on it either.

Sent from my DROID X2 using Tapatalk

 

[bhmman11]

I must have lower gears then cuz mine is pretty quick off the line and i have no problem in any driving condition. I dunno what gears it has in it i bought it 3 years ago and didnt think to ask

 

[bhmman11]

Mine is also only a regular cab not a quad cab i dunno what kinda diffrence that would make besides vehicle weight

 

[Prism]

Do you have a manual or automatic tranny in it. Is your truck 2wd or 4wd. You have a Chrysler 9.25 rearend unless someone decided to put a Dana rearend in it. The Chrysler rearend has a "Stop sign" design for a diff cover. Either way, if you plan on putting 35's or even 37's on it then I strongly suggest 4.56's. If you have a 2wd then you can get 4.88's for the Chrysler 9.25.

 

[bhmman11]

It has an automatic in it... and the last time i crawled under my truck the rear end and driveshaft have dana stickers with barcodes on them so im guessing the owner before me did that... i dunno if the really are danas but my truck will pull just about anything like a champ.. and it is also a 2wd

 

[bhmman11]

Yeah i understand what you mean but i have seen one turning 37s and i was just thowing that out there not something i personally want to do cuz i dont have deep pockets for gas lol... i just want 35s but im happy with my 33s i still want to find the right level kit to put on my truck

 

[bhmman11]

Thanks i appreciate the help... im going to look them up right now

 

[The Assassin]

Agreed, do the HBS leveling kit.

 

[suzukiquadrider]

i would neve lift a 3.7 due to power, 37s and 35s weight a lot!

 

[The Assassin]

i would neve lift a 3.7 due to power, 37s and 35s weight a lot!

+1. My 38's on my 4.7 is pushing it as it is. Thank god for the 4.56 gears, Superchips, and other mods.

 

[TheMaddog]

Welcome. And I also have a 3.7. But mines a 08. If anything, I'd run a leveling kit and 35s on there, mainly because we don't have a lot of power, and do you have a rc or qc?

 

[TheMaddog]

Also, good luck trying to find any mod stuff other than from 3rd strike. It's real hard to find. And if you do. Let me know lol.

 

[bhmman11]

Yeah i only plan on running 35s with a level because of power... and i have a regular cab and if i find anywhere to get anything else ill be sure to let you know