4th Gen B (13-18) seat into a 4th Gen A (09-12)

[Beeshrat]

Hey everyone,

I have a set of 4th Gen B (13-18) Limited Leather Seats with powered and heat/cooling functions.
I would like to install these seats into my 4th Gen A (09-12) SLT. I am looking for advice to get this swap sorted.
I am not worried about the heated/cooling functions, I would like to get the Limited seats installed with power functions more than anything else. Any advice is much appreciated if you have done this. I've checked just about everywhere and I cant seem to figure this one out.

For reference, I have a 2012, and Im trying to install 2013 seats into it.

 

[SitKneelBend]

Hey everyone,

I have a set of 4th Gen B (13-18) Limited Leather Seats with powered and heat/cooling functions.
I would like to install these seats into my 4th Gen A (09-12) SLT. I am looking for advice to get this swap sorted.
I am not worried about the heated/cooling functions, I would like to get the Limited seats installed with power functions more than anything else. Any advice is much appreciated if you have done this. I've checked just about everywhere and I cant seem to figure this one out.

For reference, I have a 2012, and Im trying to install 2013 seats into it.

For power. It can run 12v straight from the battery.

Seat swap wiring

So I want to swap out my manual seats for power and i was just wondering if anyone knew what these wires are. Im guessing they are power and ground. But im not sure and i dont want to set of the air bags lol. The first picture is the yellow plug and 5 wires that come out of the floor. The second...

www.ramforum.com

Mine was a 2014 so if you want to verify that the wiring on the seat is correct, you can look up the wiring information for the source vehicle for the seats on this site:

https://connectorrepairkit.mopar.com/

 

[BigTex2500]

Hey everyone,

I have a set of 4th Gen B (13-18) Limited Leather Seats with powered and heat/cooling functions.
I would like to install these seats into my 4th Gen A (09-12) SLT. I am looking for advice to get this swap sorted.
I am not worried about the heated/cooling functions, I would like to get the Limited seats installed with power functions more than anything else. Any advice is much appreciated if you have done this. I've checked just about everywhere and I cant seem to figure this one out.

For reference, I have a 2012, and Im trying to install 2013 seats into it.

Were you able to make the switch? I'm looking at doing the same.