xtremewlr
Senior Member
I bought some 2012 Limited Edition, full leather, full power (driver and passenger), heated and cooled, crew cab seats to replace the stock cloth seats in my 2004 QC. This thread will detail my installation and hopefully help anyone out looking to do something similar.
The front seats are a direct bolt in with some work on the wiring to get the power, seat heater and the cooling to work.
Rear seats require some addition modifications to work since the seats I bought were from a Crew Cab.
I didn't get the console show in the pic here, I don't want to try and install that in my truck, I want to retain a jump seat. I found a new jump seat with cup holders on ebay from a 2014.
All seats, including the jump seat if you go that route, are the same from 2009 to 2017 from what I have found. There might be some wiring differences between the years but they otherwise are interchangable. 4th gen front seats are a direct swap into the 3rd Gen (except wiring).
The front seats are a direct bolt in with some work on the wiring to get the power, seat heater and the cooling to work.
Rear seats require some addition modifications to work since the seats I bought were from a Crew Cab.
I didn't get the console show in the pic here, I don't want to try and install that in my truck, I want to retain a jump seat. I found a new jump seat with cup holders on ebay from a 2014.
All seats, including the jump seat if you go that route, are the same from 2009 to 2017 from what I have found. There might be some wiring differences between the years but they otherwise are interchangable. 4th gen front seats are a direct swap into the 3rd Gen (except wiring).