t0ymach1n3
Senior Member
As stated in my last post, here are a few more items i'd like to see get a good home. Below pricing is OBO and buyer covers shipping. I will do a pickup or meet you somewhere close to Jacksonville, FL. I am also open to trades for any 4th gen parts you might have. Mainly looking for front and back bumper without parking sensors with the front NOT having the license plate mount or holes drilled out and the rear having dual cutouts, tailgate, regular cab with the sunroof (legit just the cab part and gutted is fine as long as in mint condition), any 6.4L engine parts except the block as I have one already, a Cresspo Hemiwing, BacFlip bed cover or 22in SRT10 rims (OEM or Replicas which must be a gloss black to even consider). Thanks!
Ram 1500 basic dash w/airbag:
In great condition, a bit dusty but can be easily cleaned up. Would prefer not to have to ship (I'm in Jacksonville, FL) but can be worked out. Comes also with the air ducting and the subframe. Again all in great condition. Asking $350
Jump seat radio bezel and drawer:
From my 2014 when I did my center console swap. These are mint and in great condition. Asking $150 for the setup
2 center console tops:
One is from a Laramie and complete including the rubber mat for the inside. The other is grey and missing the latch for the top, but can be replaced. Also comes with the rubber mat. Asking $150 for the black Laramie and $100 for the grey regular lid.
8 speed dial shifter w 4x4 buttons:
I don't recall how I came into this one but it does work (tried in my truck) and has nothing wrong with it. Asking $250
HVAC system w/heater core and blower motor:
This was pulled from my 2014 for a modified setup and didn't modify it. This is a working and solid unit. No issues with the motor, heater core or any tabs broken. A bit dirty and could use a good wipe down and will need some new foam around it but otherwise in great condition. It has the air filter slot but I don't have the cover. Asking $175
AC condenser/Transmission cooler for a 5.7L w/65RFE
Nothing wrong with the cooling tubes or the condenser. Were pulled for a project that no longer required the setup. Asking $175 for the whole setup
2014 Ram 1500 intake w/fuel rails and injectors
Pulled for the 6.4L intake swap and I decided to go with the 6.4 injectors. Has about 100K on it but worked great before being pulled. Including the air intake although it's missing one part of the hose and can't seem to find it. Asking $300
Ram 1500 basic dash w/airbag:
In great condition, a bit dusty but can be easily cleaned up. Would prefer not to have to ship (I'm in Jacksonville, FL) but can be worked out. Comes also with the air ducting and the subframe. Again all in great condition. Asking $350
Jump seat radio bezel and drawer:
From my 2014 when I did my center console swap. These are mint and in great condition. Asking $150 for the setup
2 center console tops:
One is from a Laramie and complete including the rubber mat for the inside. The other is grey and missing the latch for the top, but can be replaced. Also comes with the rubber mat. Asking $150 for the black Laramie and $100 for the grey regular lid.
8 speed dial shifter w 4x4 buttons:
I don't recall how I came into this one but it does work (tried in my truck) and has nothing wrong with it. Asking $250
HVAC system w/heater core and blower motor:
This was pulled from my 2014 for a modified setup and didn't modify it. This is a working and solid unit. No issues with the motor, heater core or any tabs broken. A bit dirty and could use a good wipe down and will need some new foam around it but otherwise in great condition. It has the air filter slot but I don't have the cover. Asking $175
AC condenser/Transmission cooler for a 5.7L w/65RFE
Nothing wrong with the cooling tubes or the condenser. Were pulled for a project that no longer required the setup. Asking $175 for the whole setup
2014 Ram 1500 intake w/fuel rails and injectors
Pulled for the 6.4L intake swap and I decided to go with the 6.4 injectors. Has about 100K on it but worked great before being pulled. Including the air intake although it's missing one part of the hose and can't seem to find it. Asking $300
Last edited:
