4th Gen Ram 1500 parts cleanup round 2!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

t0ymach1n3

Senior Member
Joined
Dec 16, 2021
Posts
219
Reaction score
175
Location
Dallas, TX
Ram Year
2014
Engine
5.7L???
As stated in my last post, here are a few more items i'd like to see get a good home. Below pricing is OBO and buyer covers shipping. I will do a pickup or meet you somewhere close to Jacksonville, FL. I am also open to trades for any 4th gen parts you might have. Mainly looking for front and back bumper without parking sensors with the front NOT having the license plate mount or holes drilled out and the rear having dual cutouts, tailgate, regular cab with the sunroof (legit just the cab part and gutted is fine as long as in mint condition), any 6.4L engine parts except the block as I have one already, a Cresspo Hemiwing, BacFlip bed cover or 22in SRT10 rims (OEM or Replicas which must be a gloss black to even consider). Thanks!

Ram 1500 basic dash w/airbag:
In great condition, a bit dusty but can be easily cleaned up. Would prefer not to have to ship (I'm in Jacksonville, FL) but can be worked out. Comes also with the air ducting and the subframe. Again all in great condition. Asking $350
IMG_4732(1).JPGIMG_4733(1).JPG

Jump seat radio bezel and drawer:
From my 2014 when I did my center console swap. These are mint and in great condition. Asking $150 for the setup

IMG_4718(1).JPG

2 center console tops:
One is from a Laramie and complete including the rubber mat for the inside. The other is grey and missing the latch for the top, but can be replaced. Also comes with the rubber mat. Asking $150 for the black Laramie and $100 for the grey regular lid.

IMG_4720(1).JPGIMG_4721(1).JPGIMG_4723(1).JPGIMG_4724(1).JPGIMG_4725(1).JPG

8 speed dial shifter w 4x4 buttons:
I don't recall how I came into this one but it does work (tried in my truck) and has nothing wrong with it. Asking $250

IMG_4726(1).JPGIMG_4727.JPG

HVAC system w/heater core and blower motor:
This was pulled from my 2014 for a modified setup and didn't modify it. This is a working and solid unit. No issues with the motor, heater core or any tabs broken. A bit dirty and could use a good wipe down and will need some new foam around it but otherwise in great condition. It has the air filter slot but I don't have the cover. Asking $175

IMG_4729(1).JPGIMG_4728(1).JPG

AC condenser/Transmission cooler for a 5.7L w/65RFE
Nothing wrong with the cooling tubes or the condenser. Were pulled for a project that no longer required the setup. Asking $175 for the whole setup

IMG_4740(1).JPGIMG_4741(1).JPGIMG_4742(1).JPG

2014 Ram 1500 intake w/fuel rails and injectors
Pulled for the 6.4L intake swap and I decided to go with the 6.4 injectors. Has about 100K on it but worked great before being pulled. Including the air intake although it's missing one part of the hose and can't seem to find it. Asking $300

IMG_4735(1).JPG
 
Last edited:

Mleads310

Senior Member
Joined
May 19, 2020
Posts
140
Reaction score
36
Location
NYC
Ram Year
2013
Engine
5.7
Can you post a pic of the grey opened up? I just want to make sure it's the same as my 13 sport regular cab. I just need the bottom half (broke the bottom latch to the lower tub access)

Thanks
 
OP
OP
t0ymach1n3

t0ymach1n3

Senior Member
Joined
Dec 16, 2021
Posts
219
Reaction score
175
Location
Dallas, TX
Ram Year
2014
Engine
5.7L???
Sorry for the late reply. I can but i'll have to dig it back out of my storage unit. It's the same inside as the black one I have listed as well. Let me know if you'd still like a pic
 

RamExpress12

Member
Joined
Feb 19, 2013
Posts
31
Reaction score
3
Ram Year
2012
Engine
Hemi 5.7
Do you know if the center consoles would fit in a 2012?
 

Spsully

Senior Member
Military
Joined
Jan 29, 2022
Posts
229
Reaction score
241
Location
34450
Ram Year
2004
Engine
Hemi 5.7
you have me wondering if a 4th gen dash swap into my 3rd gen is doable

Edit
Nope. Free bump
 
Last edited:
OP
OP
t0ymach1n3

t0ymach1n3

Senior Member
Joined
Dec 16, 2021
Posts
219
Reaction score
175
Location
Dallas, TX
Ram Year
2014
Engine
5.7L???
***PRICE REDUCED!!!***

Dash - $100
Radio bezel and drawer - $75
Grey lid - $50
Dial shifter - $100
AC unit - $100
5.7L intake - $125
 

IDSandman

Senior Member
Joined
Jul 10, 2021
Posts
464
Reaction score
613
Location
Idaho
Ram Year
2018
Engine
5.7
I've got a 4th gen black Powder coated steel front bumper with LED's I'm looking to trade for a 2nd gen steel bumper. I'm located in Sacramento, CA. Thank you. Pm for more info. It's also posted on Facebook market place.
Did you just hijack this guys post with your own sale?
 

IDSandman

Senior Member
Joined
Jul 10, 2021
Posts
464
Reaction score
613
Location
Idaho
Ram Year
2018
Engine
5.7
Yes. RAM forum won't let me start my own thread cause I'm not cool enough so blah! Here it is. It's a really nice bumper in great shape.

PS thank you Sandman. Much appreciated.
You’re welcome. It’s just a giant douche move. But hey, you do you. ;)
 

Bandit517

That Trials Guy
Supporting Member
Joined
Jan 22, 2021
Posts
835
Reaction score
1,099
Location
Wauseon, OH
Ram Year
2016
Engine
5.7
Yes. RAM forum won't let me start my own thread cause I'm not cool enough so blah! Here it is. It's a really nice bumper in great shape.

PS thank you Sandman. Much appreciated.
It's not a question of "being cool enough". It's the rules the forum has in place to protect it's members from scams. You need a certain number of forum posts and I think you've got to be a member for a certain amount of time before being able to post items for sale. And even then you have to post a picture with a hand written sign with your user name on it. So don't be surprised when the forum admin team have their way with you over not abiding to the rules. Oh, and you said you're in Sacramento, CA but your profile location says Shanghai. Which is it? Because that's another red flag within the 2 posts you've made on this forum.
 
Top