5" BDS Rear Coils, Panhard Bar Relocation kit and Bump Stop kit.

[JB1]

These are the coils needed to change your truck from a 3" rear lift to a 5" rear coil lift or eliminate those rear coil spacers. This includes used 5" rear BDS coils and used rear bump stops. The parts only had 7k miles on them when I removed them from my truck.

I placed a stock oem coil beside the BDS coils in one picture to give it some scale but obviously that isn't included in this sale.

I'm asking $350 shipped to CONUS or best offer, this is a heavy box and shipping will be expensive. I prefer paypal friends and family.

 

[JB1]

Open to reasonable offers

 

[a_guerrajr]

Bump for great seller.

 

[JB1]

Bump

 

[hodge-xj]

Can you measure the amount that track bar bracket drops the bar? I'm looking for one if it's dimensions are right and you'd be willing to separate

Sent from my SM-N920V using Tapatalk

 

[JB1]

I’ll measure it and reply back but I’m not sure about separating.

I originally put this combo together for a different member to replace his procomp rear spacer setup but he just disappeared

 

[hodge-xj]

I’ll measure it and reply back but I’m not sure about separating.

I originally put this combo together for @T JAZ to replace his procomp rear spacer setup but he just disappeared

https://www.ramforum.com/threads/fox-vs-king-vs-icon-front-coilovers.138867/page-16

Did BDS sell the parts individually. If the bracket measurements work with what I'm looking to do I'll try and get ahold of them.

Sent from my SM-N920V using Tapatalk

 

[JB1]

Usually for individual parts they refer you to a local shop that’s a distributor so you might want to start there.

I’ll measure it later today after work

 

[hodge-xj]

Usually for individual parts they refer you to a local shop that’s a distributor so you might want to start there.

I’ll measure it later today after work

I got ya. I'll pm you in a bit. Hiding in the **** house in a refinery. Don't wanna clog your F.S thread

Sent from my SM-N920V using Tapatalk

 

[JB1]

This thread doesn’t matter we can keep it here

 

[hodge-xj]

This thread doesn’t matter we can keep it here

Ok didn't want to hijack it. Gonna be throwing in some superlift/mopar rear coils and need to rectify the track bar and sway bar. I'll make something for the brake lines but am not interested in fabbing anything honestly.

Sent from my SM-N920V using Tapatalk

 

[JB1]

Looks like the bracket is 2-5/8”center to center on the lower which might be just what you need, hard to position/balance my big tape and take a pic . The upper hole is 4” cen-cen

Interested?

 

[hodge-xj]

Sure am, and that mounts axle side and not frame side correct?

Sent from my SM-N920V using Tapatalk

 

[JB1]

Sure am, and that mounts axle side and not frame side correct?

Sent from my SM-N920V using Tapatalk

Yes it mounts on the axle so it won’t be near your exhaust, plus it moves the bar up which gets it out of the way of the diff cover

 

[Wayne43]

Coils still available?

 

[JB1]

Yes the coils only are still available

 

[Nick@GotExhaust]

Buy with confidence from @JB1 , good seller and buyer