Advice on some wheels

[VTL]

I want to buy the XD Monster wheels but I dont know if it will stay in line or come out of the fender flares of the car.

The wheel specs is this 20X10 8X6.5 5.03bs with -12 offset. My Dodge is going to get a 6" lift and 37" wheels but I dont what them to rub when I turn or stay too inside the wheel arch

Advice would be great

 

[0212353]

I believe a -12 will push them out pretty far.

 

[VTL]

I am putting the bushwalker fender flares. I just want to be sure because I dont want to put the lift and see that the wheels are no good

 

[quietpeen]

question, your info says you have a 5.7 which would be a 1500, but you listed wheels for a heavy duty. If you have a mega cab that makes sense, but if not you would have troubles

 

[0212353]

question, your info says you have a 5.7 which would be a 1500, but you listed wheels for a heavy duty. If you have a mega cab that makes sense, but if not you would have troubles

they make 2500 Hemis.

 

[quietpeen]

damn it!!! i need more coffee lol

 

[VTL]

Its a 2500 any advice on the wheels? I really like that model

 

[ramin44s]

should be fine they will stick out yes but i doubt you will rub

 

[ramhunter9]

-12 will be perfectly flush with the fender flare you are choosing

 

[VTL]

thanks for all the advice , I was a bit worried that I would not be able to use this model of wheels on the truck

 

[MADDOG]

Not to worry...with the flares it should look pretty good!