Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Bro, what in Godzilla beating down the block are you powering with that iron board amp? I love that clean look!!!Here are mine. Kicker 200.4 behind the passenger side, JL 500/1 behind drivers side
Droid Incredible 2 on the move!!!
Use a step-drill bit to create a hole to allow a proper riv-nut to be installed; prior to installing the rivnut, use touch-up paint to cover and protect the exposed paint left by the drilling. Mount amp(s) to ¼" ABS sheet, drill mounting holes in the ABS aligned with the rivnut(s), and use proper screws to match rivnut(s) to mount the amp "rack" to the rivnut(s) in the rear firewall. That's the clean, easy-to-remove (and remount) amp rack, and allow you to do your amp mount and all wiring into the amp rack before bolting into the truck 100%What are you guys using to actually mount the amp to the back wall? Screws? If so how do you keep from going all the way through?