Best Mods for Under $100

[michael harpe]

Did you find any particular install videos or guides?

Sent from my SM-N975U using Tapatalk

? I'm confused.. was this directed to me? If so videos for what?

Sent from my SM-G960U1 using Tapatalk

 

[mbryanr2019]

Stainless steel. Found on Amazon (B07P6GNSKN), $14

Keeping the "M" vertical in Park was always a problem for me. :-D

I went with the https://www.ajtdesign-llc.com/online-store/Shift-Knob-2013-2018-RAM-BLACK-p143797148

 

[NapaRam]

Finally installed the under hood light $38 on ebay. Why it didn't come with it is a mystery.

 

[RoadRamblerNJ]

$15 usb swap out with fast charge in back center console. 30 min job and so much more functional.

Sent from my rotary telephone using Tapatalk

Man after my own heart.

I keep telling guys Red interior lights (LEDs) doesn't ruin your night vision.

 

[Bill507]

Red all the way, esp at night as most of my commute time is in darkness..

Sent from my rotary telephone using Tapatalk

 

[Bill507]

Man after my own heart.

I keep telling guys Red interior lights (LEDs) doesn't ruin your night vision.

The redder, the bedder![emoji1787]

Sent from my rotary telephone using Tapatalk

 

[mbryanr2019]

The redder, the bedder![emoji1787]

Sent from my rotary telephone using Tapatalk

I agree.

 

[SitKneelBend]

Red all the way, esp at night as most of my commute time is in darkness..

Sent from my rotary telephone using Tapatalk

The redder, the bedder![emoji1787]

Sent from my rotary telephone using Tapatalk

I agree. View attachment 187915

You can do it on the cheap too with some red Lamin-X. I even did the overhead console pinhole light, sunroof and homelink buttons...

Sent from my HTC U11 using Tapatalk

 

[4eyedconekiller]

Man after my own heart.

I keep telling guys Red interior lights (LEDs) doesn't ruin your night vision.

Wish I knew how to convert the whole gauge cluster/buttons/knobs to red or amber. Definitely my preference.

 

[SitKneelBend]

Wish I knew how to convert the whole gauge cluster/buttons/knobs to red or amber. Definitely my preference.

Tinting the whole lense would likely be the easiest for the gauges. It's a removable piece you can tint from the inside. You can use the same tint on the inside of button housings to tint them red. Lamin-X will work for all Applications mentioned. If you didn't want to unclip the lense you could tint it from the outside too with similar results and protect the lense from scratches.



Sent from my HTC U11 using Tapatalk

 

[KnurledNut]

$15 usb swap out with fast charge in back center console. 30 min job and so much more functional.

Please share the plug info and where you got it. Thanks.

 

[Bill507]

Please share the plug info and where you got it. Thanks.

Amazon.. basically plug and play in existing hole. Just cut and solder into cig lighter wires, add heat shrink.

Cllena Quick Charge 3.0 & 2.4A Dual USB Charger Socket Power Outlet for Car Marine Boat Rv Truck ATV UTV Camper (QC 3.0 - Blue) https://www.amazon.com/dp/B07CVNL274/ref=cm_sw_r_cp_apa_i_NkR5Db501QAXB

Sent from my rotary telephone using Tapatalk

 

[KnurledNut]

Amazon.. basically plug and play in existing hole. Just cut and solder into cig lighter wires, add heat shrink.

Cllena Quick Charge 3.0 & 2.4A Dual USB Charger Socket Power Outlet for Car Marine Boat Rv Truck ATV UTV Camper (QC 3.0 - Blue) https://www.amazon.com/dp/B07CVNL274/ref=cm_sw_r_cp_apa_i_NkR5Db501QAXB

Thanks!

 

[Firetruck41]

I prefer to keep the 12v power outlet and purchase a quality car charger, as they are constantly improving the chargers (for faster charging speeds) and I will undoubtedly want to upgrade the charger every year or two.

 

[KnurledNut]

I prefer to keep the 12v power outlet and purchase a quality car charger, as they are constantly improving the chargers (for faster charging speeds) and I will undoubtedly want to upgrade the charger every year or two.

Good point, however...

1) Only my dogs ride in the back and they don't have opposable thumbs.
2) The current adapter sticks out and snags things when the fold-flat is deployed.
3) Excellent for dash cam power.

 

[Bill507]

I agree. View attachment 187915

What red dome led - (44mm festoon is the size i have), are you using? I need to replace mine.

Sent from my rotary telephone using Tapatalk

 

[mbryanr2019]

What red dome led - (44mm festoon is the size i have), are you using? I need to replace mine.

Sent from my rotary telephone using Tapatalk

I had stock halogen bulbs...and used the 41mm led listed here
https://www.diodedynamics.com/41mm-hp6-led-bulbs.html

I found the original thread..
https://www.ramforum.com/threads/diode-dynamics-interior-leds.144040/

They have 44mm ones.
https://www.diodedynamics.com/led-bulbs/interior-and-license/44mm-loop.html

 

[Dannyn_01]

I did a trailer hitch receiver with the 2 inch ball... barely tow but it’s worth the bit of protection for $40.

 

[TexasDrone]

USB ports and an additional cigarette charger plug in bed of truck and hooked up to auxiliary switches.


Sent from my iPhone using Tapatalk

 

[WY-Dave]

$6 for 3M moulding tape and a CD case I had laying around. Cut the case about 1/8 bigger than the suction cut (unsucked) of the GPS holder. Stuck it to the side of the glasses cubbby.

View media item 27367