Cheap SSBC 4-pot big brake kit $600

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.


Senior Member
May 28, 2020
Reaction score
Central Valley
Ram Year
Selling a very well used 4-piston front big brake kit off my 2008 ram 1500 4wd. These should fit any 3rd gen ram 1500, and I believe they fit earlier 4th gens as well but not certain. These brakes have over 200k miles on them (~100k on rotor rings, about 5-10k on pads) and have served me very well over the last 8-10 years. Though they were functioning perfectly upon removal by my mechanic, brakes are sold as-is given the age & mileage. One of the banjo bolts broke upon removal so will just need a new banjo bolt for one of the calipers, and new mounting bolts (I wouldn’t reuse the old ones given the age).

D-531 pads (same as mitsu 3000gt vr4)

Rotors - 14” x 1.25”

These require minimum 18” wheels, but also need some spoke clearance. My factory 20” wheels would not clear the front edge of calipers without a spacer.

Will include a pair of Centerline forged 20x8” wheels that clear these calipers for an additional $400

Located in Turlock CA and much prefer local pickup. Not really wanting to ship unless all arrangements are made by buyer and I just have to drop them off at a UPS or fedex.

$600 picked up. Questions welcome…



  • A63FCD9C-F2CE-4A4D-8BDD-D8620C21FC2E.jpeg
    180.2 KB · Views: 16
Last edited: