chrisp2493
Always Modding
- Joined
- Oct 30, 2016
- Posts
- 3,006
- Reaction score
- 1,870
- Location
- Warren, OH
- Ram Year
- 2003
- Engine
- 392 Hemi
Finally have an update!! My PATC Stage 3 kit arrived today, so now I will start to fight my way through the rebuild. My new big plan is leaning towards getting a custom billet reverse pattern valvebody that will eliminate having overdrive on an electronic switch. It will have all 4 gears on the physical stick shifter, so it will make it more enjoyable to drive. The torque convertor lockup will still be on a switch, but all in all that won’t be so bad. So the gear selection should be P-R/N/Transbrake-1-2-3-4. It will have a trans brake, but I think there are a lot more internal upgrades that need done to handle a launch, so I probably won’t be doing using it.
And I’ve been working on the shifter mounting, the console is back in the truck, the cup holder and shifter trim is finished and painted, the last part is finishing the large trim bezel on the console, I have to fab up a corner on the passenger side and get it painted. That will be sometime later
I Bleed Ram Trucks
And I’ve been working on the shifter mounting, the console is back in the truck, the cup holder and shifter trim is finished and painted, the last part is finishing the large trim bezel on the console, I have to fab up a corner on the passenger side and get it painted. That will be sometime later
I Bleed Ram Trucks