Crank no stat 01 cummins

[Tybr]

I have a 2001 dodge ram 3500 that I just did a new clutch in and put head studs and gaskets on. It will crank but won’t start it seems like it’s trying at times. I have fuel up to the injectors. I’ve done everything I can think of so I came here for some help.

 

[18CrewDually]

Probably air in it still. Start at the pump banjo bolt and crack loose until you get steady fuel. Then retighten that down and crack loose 3-4 of the injector lines going into the head. When you get good fuel flow there on cranking close them off and it should light on the next crank. Make sure your batteries are up to snuff, if you have to put a charger on them too.

 

[Tybr]

I had feel coming to the injectors but I found the problem I belive. My injector hold down brackets snapped and I later learned I did not do the install procedure correct so hopefully when I did that it would be ok. I don’t know what could’ve cause led to this though

 

[Tybr]

I had fuel coming to the injectors but I found the problem I believe. My injector hold down brackets snapped and I later learned I did not do the install procedure correct so hopefully when I did that it would be ok. I don’t know what could’ve cause led to this though